Good day, all: I have released version 1.5 of my procedure for creating a bootable DOS CD. This CD can be used to boot almost any modern computer and run DOS. You can use the same procedure to create
Good evening, all: We are looking at logging software for a large Field Day effort. We have been running CT for years. Networking issues with DOS packet drivers, and the acquisition of some slightly
Good day, all: I am working on the next version of a procedure to add FreeDOS or MS-DOS to almost any WindowsXP computer in a dual-boot configuration and WITHOUT destroying the WindowsXP installation
Good day, all: I am continuing to make it easier to add DOS to a WindowsXP computer. I've created a bootable CD image that contains the tools you need to make space for DOS on a WindowsXP disk, a mul
Good day, All: I have updated my procedure for adding FreeDOS to a WindowsXP computer to match the new bootable CD I created. You can add MSDOS using the same procedure, but it is slightly harder sin
Good afternoon, all: I need to add a WinCT box to our existing DOS CT network so that I can easily use telnet to get packet spots. There is a statement in the CT_additions section about "CT Win can b
Good day, all: You can install DOS on (almost) any WindowsXP computer in about an hour, without damaging the WindowsXP installation. I have updated my written procedure for doing this, and provided a
Hi Jon: You need to download the latest CTY.DAT file from http://k1ea.com/cty/index.htm, into the same directory as your CT database file (something.bin). This does NOT affect the file you send to en
Hi Ken: Thanks. This is embarassing...I forgot the DOS edit command doesn't wrap lines! :-) Thanks for getting serial numbers by band in for M/2. 73, Mark, KD4D Ken Wolff wrote: _____________________
Good day, all: Help! :-) We would like to be able to maintain separate pass frequencies for SSB and CW for Field Day. (We will have two computers on each band, 80-15, at least). I know how to set the
Good day, all: We used CT 10.003X for WPX CW. This was a M/2. There are two networked comuters, each with a full SO2R setup. We had three problems, one serious. Minor quibbles: 1. The Check Partial W
Good day, all: I am pulling together some Field Day log files from a large network. Some QSO's may have been logged on the wrong band. I know what "Station Number" on the network generated these QSO'
Good day, all: After some research, I have been successful taking my new Dell Laptop and using it under DOS on a CT ethernet network. The Broadcom 570x Gigabit ethernet controller does not have a "DO
Good day, everyone: I just found out about a new program called httpdxcatcher. Is anyone using this on a CT ethernet network? The release notes on f5mzn's web site indicate that version 1.2 supports
Hi Ron: Since you already have a FAT32 partition, you can very easily install DOS and a small program to allow your computer to boot straight to DOS on that partition or WindowsXP. If you are interes
Hi Mal and everyone: That works as well. You do need somewhere to store the log files, though. This may be a FAT partition on a hard drive or, on some computers, a USB key... AFAIK, those instruction
Hi: That would be me. I have an updated version of the instructions if anyone is interested. All of my machines dual-boot WindowsXP and DOS. It takes me about 10 minutes - the first time will take yo
Hi Geo: It is not hard to create a bootable FreeDOS or MSDOS CD - you can even customize what is on the CD. The easiest (and most compatible) way is to boot a floppy disk image using something called
Good day, everyone: I am working on an update to my detailed procedure to add DOS (FreeDOS or MSDOS) to almost any WindowsXP computer without changing the WindowsXP installation. All of my computers
Good day, everyone: I have updated my procedure and bootable CD for installing FreeDOS (or MSDOS) on almost any WindowsXP computer. You can install FreeDOS (or MSDOS) beside WindowsXP without damagin