I have a new computer that has WIN95 preinstalled and virtually no manuals. I am assuming that one can run CT with WIN95 when booted up in the DOS mode. This is fine for my use. What I would like to
In our W2SZ/1 multi-multi effort we use the ALT-J window to allow other ops on the network to know our freq and send skeds and passes. On some bands we use two computers, e.g. one on FM and one on SS
It sounded like that could have been a problem, but I just checked and I do have the RAC.DAT and OFFICIAL.RAC files. Mine are 5 years old however, but I don't think that there are too many changes. T
Yes, packets are UDP which means that there is no guarantee of delivery. Wireless networks will have more collisions due to other part 15 devices and such, and therefore there will be more lost packe
It doesn't prevent you from making Q's. It just calculates the on and off times for your pleasure. In a contest such as SS, I keep a paper log of my times on and off so that I know when I have reache
I don't run CTWin, but I know of at least one limitation. It doesn't support the DVP card. So if you are using that, you will still need to run the DOS version. Win98SE is a reasonable way to go, alt
You CANNOT mix the loop option with Ethernet. The loop option essentially breaks the serial port into two single direction ports. The data comes in on the Rx line from one station and out on the Tx l
First, this is a list of users and one can not usually expect a reply from K1EA on the list. The latest version of CT is now at 9.90, which can be downloaded from www.k1ea.com . The DOS download file
Yes, it was working to a limited extent a two or three of years ago when I had my 847. CONFIDENTIALITY NOTICE: This message is a PRIVATE communication. This email may contain privileged and confident
Not sure of your problem, but do you have a MULTI.CFG file on each computer that identifies all the different stations and did you set up each computer to be a different station? CONFIDENTIALITY NOTI
I used version 9.89 with a MarkIIG recently without any problems. Haven't had time to check out the latest version. CONFIDENTIALITY NOTICE: This message is a PRIVATE communication. This email may con
Most radios with built in keyers operating in no keyer mode still require a stereo plug with the keying line connected to the tip and nothing connected to the other line. Ground of course to the shie
Later Icoms, such as the 756 series, have two CW inputs, one for the internal keyer (using a paddle) and one for a straight key, external keyer or computer keying. Unless you somehow internally modif
Don't even connect it to the radio to test. Type SOUND to turn on the PC speaker and you will get sidetone from the PC. That way you can check out your computer setup regardless of the radio. CONFIDE
First, have you filled out a bug report at www.k1ea.com? Second, from the fact that three of the radio control functions TO the radio don't work, I would think that there is something wrong with your
It is not required by the rules but to be accurate I would like to know what type of Q it is. My reasons include, knowing what the distribution of FM vs. SSB vs. CW Q's in the contest. I think someon
I think you mean 9.83 Yes, I got that too. I used another version of CT to enter the first QSO, after that I could use 9.83. But then again, just use a previous version. Seems like there is a bug in