When trying to re-drill the mounting holes to install the new 8 filter caps I was replacing in my Henry 2K-Classic Console, I managed to completely destroy one of the holes. Looks like it just fell a
I use ABS sheet stock or un-clad G-10 epoxy/fibreglas board for mounting electrolytics. I mount them with a few dabs of silicone rubber adhesive sealant on the bottom and let it cure for 24-hrs. I le
Holes are a freak of nature. They are increased by subtraction, and decreased by addition. But how do they fall apart? Colin K7FM _______________________________________________ Amps mailing list Am
Colin K7FM Division of course. _______________________________________________ Amps mailing list Amps@contesting.com http://lists.contesting.com/mailman/listinfo/amps
So here is the question....This looks like Phenolic type basalite board (Brown). Anyone used something newer or recommend what I can use to replace the stock board with? I have a drill press, so no i
Rich, What you have there is good for this. Now, you can get that pink colored insulation board. I can never remember the name of it, but I know Hal Mandel uses it. It's good stuff that can really wi
Gentlemen, The material is called Glastic GPO-3. PWD uses sheets of it on their bigger transformers for the HV connections. Hal Rich, What you have there is good for this. Now, you can get that pink
Glastic GPO-3 may go by the name of "red stuff" although this might be kind of casual. An important caveat with it is that although it would be excellent for the project at hand, be advised it gets l