The standard ferrite rod that you use for 10-80M works fine. I've modded quite a few amps for 6 M and I remove half the turns from the original choke. This reduces the inductance by a factor 4 and wo
slightly less than half the original uh..but not a qtr. Inductance is proportional to aprox no of turns squared with a ferrite core. 1/2 squared is 1/4. If you were to keep the length the same (ie d
The standard ferrite rod that you use for 10-80M works fine. I've modded quite a few amps for 6 M and I remove half the turns from the original choke. This reduces the inductance by a factor 4 and wo
The standard ferrite rod that you use for 10-80M works fine. I've modded quite a few amps for 6 M and I remove half the turns from the original choke. This reduces the inductance by a factor 4 and wo
There are two kinds of inductance, self inductance and mutual inductance. Mutual inductance is where an coil induces a voltage into another coil. Self inductance is where a coil induces a voltage int