In einer eMail vom 10.05.03 19:45:18 (MEZ) - Mitteleurop. Sommerzeit schreibt pe2six@xs4all.nl: Hi Erwin, With 2,7KV there will be no need for Zeners in high? configuration, idling current will be qu
In einer eMail vom 08.04.03 20:06:23 (MEZ) - Mitteleurop. Sommerzeit schreibt om7zz@stonline.sk: I would swap one for a 3CX15000B7 so you get a spare YL1056 :-) 73 Peter
Hi Andy, You will find the differences on this link: http://df6na.mayn.de/~df6na/yl105x_3.htm On VHF I use the RS1072C, also same family of tubes, same data as YL1050 except limited to 300Mc 73 Peter
In einer eMail vom 15.04.03 08:23:42 (MEZ) - Mitteleurop. Sommerzeit schreibt DL1EJA@yahoo.de: Hi Oliver That will work for you when you use the star-circuit. About 30 years ago I used linears with s
I Hello Jay, What L is the B&W coil on 80m and what DC anode current are you drawing? I guess c1 and c2 are a bit low in capacity for a Q of 10-12 on 80m unless you are using Pi-L. Probably you need
In einer eMail vom 01.12.02 17:13:11 (MEZ) Mitteleurop=E4ische Zeit schreibt= =20 mark@sandlabs.com: -- StripMime Report -- processed MIME parts -- multipart/alternative text/plain (text body -- kept
In einer eMail vom 08.12.02 10:51:04 (MEZ) Mitteleurop=E4ische Zeit schreibt= =20 craigs99@iprimus.com.au: e Hi Craig, Never use those capacitors were RF.currents are involved, they will explode, esp
In einer eMail vom 08.12.02 14:49:02 (MEZ) Mitteleurop=E4ische Zeit schreibt= =20 2@vc.net: Be careful Rich, those LLC-caps have pretty large threads! You first think it is the ideal coupling-cap but
I The thread diameter is about 6mm on those caps 73 Peter -- StripMime Report -- processed MIME parts -- multipart/alternative text/plain (text body -- kept) text/html --
I l Hi Ken, What rigs have your friends used before the FT1000MP Field to become impressed? If I were you, I would by another IC-765. That gives you dual receive and SO2R capabilities,=20 alternative
Hi folks, the Harris RF103 is mentioned on the following URL: http://www.qsl.net/g4ftc/hz1ab/home.htm seems that it is running with the 3-1000Z 73 Peter -- StripMime Report -- processed MIME parts --
I Hello Max, Please explain why PEP should equal 2,25 x RMS wattage? For my knowledge so far PEP ist the RMS wattage at the peak of the envelope without flat-topping. 73 Peter -- StripMime Report --
Hi Max That is correct, PEP is measured during one cycle, RMS for a longer duration. PEP usually equals RMS, but RMS could be lower if there is poor voltage regulation . 73 Peter -- StripMime Report
I Hi Bill, Is the root-mean-square not the averaged measurement over time anyway? In that case, could the averaged power not also be called RMS power...? Peter -- StripMime Report -- processed MIME p