It's my understanding, you can control the rig thru the CAT interface.
Meaning you cna send some data to command the radio to a freq and mode, but
you CAN NOT read back the status. Therefore, any manual tuning or mode
changes will not be reflected in the software.
de K3SK
_____
From: Sean Sharkey [mailto:g0oan@btinternet.com]
Sent: Wednesday, February 15, 2006 6:57 AM
To: K3SK
Cc: Yaesu@contesting.com
Subject: Re: [Yaesu] FT-736R CAT Issue
Hi,
This data is already available via the CAT (RS232) interface on the 736, see
the owners manual for further details.
As for a piece of software that already does this very successfully,
at least for the Apple Macintosh, see MacLoggerDX from;
http://www.dogparksoftware.com/home.html
Sorry don't know any for the PC platform.
Hope this helps.
Sean.
On 15 Feb 2006, at 11:39, K3SK wrote:
Has anyone ever developed or heard of any mods to 'read' freq and mode data
from the FT-736R? I would like to interface it to contest software.
tnx
de k3sk
_______________________________________________
Yaesu mailing list
Yaesu@contesting.com
http://lists.contesting.com/mailman/listinfo/yaesu
_______________________________________________
Yaesu mailing list
Yaesu@contesting.com
http://lists.contesting.com/mailman/listinfo/yaesu
|