I have an FT897
I have the Cat inteface installed
I want to use PSK31, using Ham Radio Deluxe, and use the Cat interface to
key the rig, but pass sound to the data port via a sound card
I built a cable from the HRD manual to get audio from the rig and get audio
to the rig thru the data port
audio is coming out of the computer (I can hear it with headphones), the rig
is keying, I can decode the other side of the contact but I can't contact
anyone, I don't think the rig is getting the audio
questions are:
1 - how do I verify if the sound it actually getting on the air?
2 - if I key rig with the CAT interface, will the rig take the audio from
the data jack? or do I have to key the rig thru the data jack for it to take
audio from the data jack?
Thanks
KD8EZS
----- Original Message -----
From: <yaesu-request@contesting.com>
To: <yaesu@contesting.com>
Sent: Tuesday, February 19, 2008 12:00 PM
Subject: Yaesu Digest, Vol 62, Issue 9
> Send Yaesu mailing list submissions to
> yaesu@contesting.com
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://lists.contesting.com/mailman/listinfo/yaesu
> or, via email, send a message with subject or body 'help' to
> yaesu-request@contesting.com
>
> You can reach the person managing the list at
> yaesu-owner@contesting.com
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Yaesu digest..."
>
>
> Today's Topics:
>
> 1. Yaesu FT450 in ARRL DX contest-reports wanted (John Geiger)
> 2. FT-847 CW Filter (W0WOI@aol.com)
> 3. MD-100 Settings For Mark V Field (Emmett Bean)
> 4. Re: MD-100 Settings For Mark V Field (Flemming J?rgensen)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Mon, 18 Feb 2008 14:45:12 -0800 (PST)
> From: John Geiger <n5ten@yahoo.com>
> Subject: [Yaesu] Yaesu FT450 in ARRL DX contest-reports wanted
> To: cq-contest@contesting.com, yaesu@Mailman.qth.net,
> yaesu@contesting.com
> Message-ID: <209247.68931.qm@web63310.mail.re1.yahoo.com>
> Content-Type: text/plain; charset=iso-8859-1
>
> Did anyone run the new Yaesu FT450 in this past
> weekend's ARRL DX contest? If so, how did it do under
> contest conditions? I would be interesting in hearing
> any reports or opinions about it.
>
> 73s John AA5JG
>
>
>
> ____________________________________________________________________________________
> Looking for last minute shopping deals?
> Find them fast with Yahoo! Search.
> http://tools.search.yahoo.com/newsearch/category.php?category=shopping
>
>
> ------------------------------
>
> Message: 2
> Date: Mon, 18 Feb 2008 22:57:45 EST
> From: W0WOI@aol.com
> Subject: [Yaesu] FT-847 CW Filter
> To: yaesu@contesting.com
> Message-ID: <d00.2627ae7e.34ebadb9@aol.com>
> Content-Type: text/plain; charset="US-ASCII"
>
>
> My 847 has the "Collins-Yaesu" 500 Hz CW filter.
>
> Has anyone added to the radio an INRAD 455 kHz I-F "roofing filter" and
> your
> experience with that configuration?
>
> Offline at _w0woi@aol.com_ (mailto:w0woi@aol.com)
>
> Thank you and 73.
>
> bill
>
>
>
> **************Ideas to please picky eaters. Watch video on AOL Living.
> (http://living.aol.com/video/how-to-please-your-picky-eater/rachel-campos-duffy/
> 2050827?NCID=aolcmp00300000002598)
>
>
> ------------------------------
>
> Message: 3
> Date: Tue, 19 Feb 2008 05:17:36 -0800 (PST)
> From: Emmett Bean <bear_77586@yahoo.com>
> Subject: [Yaesu] MD-100 Settings For Mark V Field
> To: yaesu@contesting.com
> Message-ID: <457223.99264.qm@web51408.mail.re2.yahoo.com>
> Content-Type: text/plain; charset=iso-8859-1
>
> Could someone give me some advice as to the settings
> for an MD-100A8X mic and a Mark V Field.
>
> My voice is mid range and I have tried many different
> settings and so far without much success.
>
> thanks and '73 Emmett KZ5I
>
>
> ------------------------------
>
> Message: 4
> Date: Tue, 19 Feb 2008 17:54:00 +0100
> From: Flemming J?rgensen <flej@mail.tdcadsl.dk>
> Subject: Re: [Yaesu] MD-100 Settings For Mark V Field
> To: "Emmett Bean" <bear_77586@yahoo.com>, <yaesu@contesting.com>
> Message-ID: <C0A4839D11F84BA4A5C6EDEC4AAB7733@flejPC>
> Content-Type: text/plain; format=flowed; charset="iso-8859-1";
> reply-type=original
>
> Try these settings:
>
> MD 100:
> 4-4 are 2
> 5-9 are 2.4
> 7-7 are 150- 3100
>
> pick thes eup on the website : www.va3cr.net
>
> where these is a lot of info for the FT1000 MkV and other FT1000 stations.
>
> 73 de OZ4P, Flemming
> ----- Original Message -----
> From: "Emmett Bean" <bear_77586@yahoo.com>
> To: <yaesu@contesting.com>
> Sent: Tuesday, February 19, 2008 2:17 PM
> Subject: [Yaesu] MD-100 Settings For Mark V Field
>
>
>> Could someone give me some advice as to the settings
>> for an MD-100A8X mic and a Mark V Field.
>>
>> My voice is mid range and I have tried many different
>> settings and so far without much success.
>>
>> thanks and '73 Emmett KZ5I
>> _______________________________________________
>> Yaesu mailing list
>> Yaesu@contesting.com
>> http://lists.contesting.com/mailman/listinfo/yaesu
>>
>
>
>
> ------------------------------
>
> _______________________________________________
> Yaesu mailing list
> Yaesu@contesting.com
> http://lists.contesting.com/mailman/listinfo/yaesu
>
>
> End of Yaesu Digest, Vol 62, Issue 9
> ************************************
_______________________________________________
Yaesu mailing list
Yaesu@contesting.com
http://lists.contesting.com/mailman/listinfo/yaesu
|