I have received my unit from Great River and look forward to hooking
this lil' puppy up this evening.
I will be using the "Line Out" jack on the unit to feed the "audio-in"
on the Kam Plus. My question is regarding the need to hook up a PTT
line from the FT-990 to the DSP-59Y. If I understand the manual
correctly, the PTT input to the DSP-59Y is required for transceivers
that do not fully mute "receive" when transmitting. I think the 990
does just that. Out of curiosity I looked at the PTT line (at the RTTY
connection on the 990). There is more then just a simple open-short
situation between PTT and Ground when transmitting or not. There is a
small amount of DC voltage there. I am hesitant to run this into the
DSP-59Y, especially when it may not even be needed.
Any comments will be appreciated.
=====
Bill Brannick
ARS: KN6FJ
ICQ # 8393042
--
FAQ on WWW: http://www.qsl.net/k7on/yaesu.html
Submissions: yaesu@contesting.com
Administrative requests: yaesu-REQUEST@contesting.com
Problems: owner-yaesu@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|