>Bill, what I did was to buy a "Y" connector place it at the amp where
the
>PTT signal goes in. I the ran the new leg of the "Y" to the "PTT" in
on the
>DPS59Y. That way I was able to use a known working signal for two
>purposes. One to drive the AMP relay and One to drive the DSP PTT.
Works
>for me.
Why did'nt I think of that.. much easier then wiring one of those lil'
DIN connectors.
I must have a tendency to make easy issues difficult.. Ha!
Sure glad there is a lot of really smart folks on this group to keep
me out of trouble..
Thanks Grover..
And thanks to all who commented so quickly... now I can see what DSP
is all about!
--
FAQ on WWW: http://www.qsl.net/k7on/yaesu.html
Submissions: yaesu@contesting.com
Administrative requests: yaesu-REQUEST@contesting.com
Problems: owner-yaesu@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|