Re: [WriteLog] WRITELOG and WSJT

[Mike Seguin <n1jez@burlingtontelecom.net>]

I'm primarily a VHF and up Op... but I play around on 20M FT8.

I should mention that there is a second operating position in my shack 
that uses a YCCC SO2R box with Writelog. That also functions with VSPE 
to work with WSJT-X.
Mike

On 12/15/2018 8:31 AM, Don Hill AA5AU wrote:
> Thanks Mike. I will try to figure this all out when I have more time, but it
> looks like the best solution I've seen to enable WSJT-X and WriteLog to
> share the same radio port without cost.
>
> Thanks for the all the information. I may be bending your ear if I run into
> trouble.
>
> 73, Don AA5AU
>
> -----Original Message-----
> From: WriteLog [mailto:writelog-bounces@contesting.com] On Behalf Of Mike
> Seguin
> Sent: Saturday, December 15, 2018 6:59 AM
> To: writelog@contesting.com
> Subject: Re: [WriteLog] WRITELOG and WSJT
>
> Don,
>
> Linked the wrong VSPE Setup.png. Sorry.
>
> Here's the correct link. The split is COM15
>
> https://drive.google.com/file/d/1-mbA6nD5f6IHNAMlG7BSPfb0mz6FWZI1/view?usp=s
> haring
>
> On 12/15/2018 7:06 AM, Mike Seguin wrote:
> > Hi Don,
> >
> > Here's info on the 64 bit side from EnterLogic:
> >
> > ====
> > License
> > Because of Microsoft Kernel Code signing requirement, we had to purchase
> > digital signature (price is $499 per year), that is why VSPE is not
> > freeware for 64 bit platform. For 32 bit platform though, VSPE is free.
> >
> > For more detailed information please look at User license agreement.
> > ====
> >
> > The 32 bit version will run on 64 bit.
> >
> > I run it typically with PowerSDR mRX PS with my ANAN-100 SDR, Writelog
> > and WSJT-X.
> >
> > Screen shot of my setup (VPSE setup)is here:
> https://drive.google.com/file/d/1EXH86pHZ72MOOPIFHtLXXnBbaxfQQeD2/view?usp=s
> haring
> > I create two virtual (pair) ports and then split one. If I had a 'real'
> > serial port on the radio, I would just create a splitter. Since I'm
> > running SDR, it's virtual.
> >
> > PowerSDR setup.png shows the radio virtual port setup:
> https://drive.google.com/file/d/1dijYSpuuoX261yaeCiUykeICsQ3DUiO4/view?usp=s
> haring
> > Port sharing.png shows PowerSDR, Writelog and WSJT-X all running:
> https://drive.google.com/file/d/1kmH7HGO-AsMp8qGQujvP5jqhBaVUmh-G/view?usp=s
> haring
> > You can see they all show the same Freq. WL and WSTX are polling
> > PowerSDR via the splitter. There is also PTT via the splitter.
> >
> > I run VSPE on startup (not as a service). I do this so it's easy to
> > start/stop if I need make any changes or check performance. I do this by
> > putting a shortcut in my startup folder (I'm running WIN10).
> >
> > There are command line options for VSPE. My shortcut uses this:
> >
> > "C:\Program Files (x86)\Eterlogic.com\Virtual Serial Ports
> > Emulator\VSPEmulator.exe" e:\n1jez.vspe -minimize -hide_splash
> >
> > The VSPE info screen shows the stats on the splitter. You can see WSJT
> > and WL are connected.
> https://drive.google.com/file/d/1534jgHGUqEu84PPltBE0VkbM0plU0MrC/view?usp=s
> haring
> > On 12/14/2018 10:46 PM, Don Hill AA5AU wrote:
> >
> > > Mike, can you tell us more about this program?
> > >
> > > Thanks,
> > > Don AA5AU
--

73,
Mike, N1JEZ
"A closed mouth gathers no feet"
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/