Understood, I meant to say I would like to do a better job of "bonding"
the many devices in my shack. I was just curious why #10 wire.
John KK9A
To: writelog@contesting.com
Subject: Re: [WriteLog] Using K3 KIO3B USB with Writelog
From: Jim Brown <jim@audiosystemsgroup.com>
Reply-to: jim@audiosystemsgroup.com
Date: Mon, 28 Dec 2015 12:09:30 -0800
Hi John,
The larger gauge conductor is for BONDING only. The intent is to minimize
difference in potential between equipment by brute force Ohm's Law. This
is all discussed in the tutorial I referenced, both specific details of
what needs to be bonded and WHY.
For the signal pair, conductors as small as #24 are fine.
73, Jim K9YC
On Mon,12/28/2015 11:13 AM, john@kk9a.com wrote:
I would like to do a better job of interconnecting the many devices in my
shack. Why do you recommend such a heavy and stiff #10 wire? Is smaller
wire or 3/8 braid acceptable?
John KK9A
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|