I currently use Writelog without a rigblaster for CW, RTTY, PSK and SSB.
I used the interface that is in the Writelog help file and everything works
just fine. I have wav files for each letter of the alphabet and each number
and Writelog puts it all together for me. I also have Function Key buffers
set up to play wav files. It will record on the fly so I can change any
Function Key buffer while in the middle of a contest.
Why spend all kinds of money and interfaces when you can build the one in
the help file for less than $20.00.
Jim VE9WH / VE9TTY
http://ve9wh.weblink.nbtel.net/dxclusters.html
DX Cluster Telnet sites
-----Original Message-----
From: owner-writelog@contesting.com
[mailto:owner-writelog@contesting.com]On Behalf Of Les Peters
Sent: Monday, October 09, 2000 12:12 PM
To: Richard B Drake
Cc: writelog@contesting.com
Subject: Re: [WriteLog] RIGBLASTER and DVK
While it is true that for CW, RTTY, and digital modes Writelog can
control the PTT line it does not have the capability to control it for
SSB operation. If you look at the port setup menu you will notice the
only available option for configuring a DVK is parallel port (LPT1 -
4). Again I say the issue here is that no software driver exists to
control the PTT line for SSB operation. You can key your transceiver's
PTT line yourself with a footswitch but as far as VOX operation your out
of luck.
Richard B Drake wrote:
> > -----Original Message-----
> > From: owner-writelog@contesting.com
> > [mailto:owner-writelog@contesting.com]On Behalf Of Les Peters
> > Sent: Monday, October 09, 2000 9:32 AM
> > To: Randy Thompson, K5ZD
> > Cc: Sante - IK0HBN; writelog@contesting.com
> > Subject: Re: [WriteLog] RIGBLASTER and DVK
> >
> >
> >
> > I talked to Del K1UHF at a local hamfest this past
> > weekend about the difficulty
> > in using Writelog with the Rigblaster. The problem is
> > that Writelog does not
> > have the capability to control the Rigblaster PTT line
> > via a serial interface.
>
> I don't quite understand that. I am using Writelog with a
> RIGblaster and it controls the PTT line via the serial port just
> fine on both RTTY and PSK31. All one needs to key the PTT line is
> to control DTR, RTS or both. That's what Writelog does and what
> RIGblaster want's so see. I also use that to key my rig on CW.
> What seems to be the problem?
>
> ----
> 73, Rich - W3ZJ
>
> --
> WWW: http://www.writelog.com/
> Submissions: writelog@contesting.com
> Administrative requests: writelog-REQUEST@contesting.com
> Problems: owner-writelog@contesting.com
--
WWW: http://www.writelog.com/
Submissions: writelog@contesting.com
Administrative requests: writelog-REQUEST@contesting.com
Problems: owner-writelog@contesting.com
--
WWW: http://www.writelog.com/
Submissions: writelog@contesting.com
Administrative requests: writelog-REQUEST@contesting.com
Problems: owner-writelog@contesting.com
|