Don,
I am having no problems with my Kenwood TS2000. Could it be possible that
you are using some sort for USB to serial converter that is having issues or
an old serial card that doesn't have the 6550UARTS or better? I run my
Kenwood at 19200bps and all the Writelog versions 10.50 or better seemed to
track it fine. WL is set on Kenwood, 19200, Poll and Comm Ptt=Yes. Hope
this helps.
Jim
KE0L
> -----Original Message-----
> From: writelog-bounces@contesting.com
> [mailto:writelog-bounces@contesting.com]On Behalf Of Don Hill AA5AU
> Sent: Monday, January 17, 2005 9:12 PM
> To: writelog@contesting.com
> Subject: RE: [WriteLog] "Random mode changes"
>
>
>
> I wasn't going to comment on this one until Al turned a light
> bulb on for me.
>
> I don't know if this applies to the '570, but on my TS-870 I had
> to use 4800 and
> two stop bits in order for WL to recognize it. In the radio
> itself, I set the
> baud rate to 4800 and 2 stop bits.
>
> In Writelog, Polling in on and the radio set to 4800.
>
> Try that. I don't have my Kenwoods on line at this time, but I
> do remember
> having to set them to 4800 and 2 stop bits.
>
> 73, Don
>
>
> -----Original Message-----
> From: writelog-bounces@contesting.com
> [mailto:writelog-bounces@contesting.com]
> On Behalf Of Aldewey@aol.com
> Sent: Monday, January 17, 2005 8:47 PM
> To: k1dan@profirefighter.com; writelog@contesting.com
> Subject: Re: [WriteLog] "Random mode changes"
>
> In a message dated 1/17/2005 4:36:10 PM Central Standard Time,
> k1dan@profirefighter.com writes:
> The Writelog program is all that
> changes, my rig does not change modes during this time.
> I am using a Kenwood TS-570D and have the baud rate for the com
> port set to
> 1200. I am using V 10.51M, but this was happening with previous
> versions as
> well.
>
> Has anyone had this problem, and how did you fix it?
> Dan K1DAN
> DAn;
>
> I had a similar problem in TR. The problem was that RF was
> getting into the
> radio control lines fooling the computer into thinking the radio
> had changed
> modes. This was easily solved in TR by setting a parameter
> called "NO POLL
> DURING PTT" to true. This disabled the radio controls whenever
> key was PTT was
> down.
>
> In Writelog, I think the same thing is accomplished if you set
> the Comm PTT
> field to SYNC for the COM port that you have your radio controls
> on. For some
> reason, I don't have this problem in Writelog so I have never tried this,
> however.
>
> 73,
>
> AL, K0AD
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web: http://www.writelog.com/
>
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|