Gordon,
I have tried the Flexradio Driver and it does not achieve what I want it
to. If the Flexradio Driver allowed me to designate which COM Port is for
each of my slices that would be great. But it doesn't so I have to use a
round about method to get what I want.
Mark KB3Z
On Mon, Apr 6, 2026 at 3:11 PM Gordon LaPoint <gordon.lapoint@gmail.com>
wrote:
> Have you looked at the latest Writelog update to the Flexradio Driver?
> see: https://writelog.com/category/flexradio-rig-driver
> Gordon - N1MGO
>
> On 4/6/2026 9:20 AM, Mark Griffin wrote:
> > SR,
> > I have both Slice A and Slice B created and working using the Kenwood
> > TS-2000 as a rig. But now the question is getting spots that Writelog
> > receives from the Telnet to go from Writelog to SmartSDR. I do have a
> port
> > in my Flexradio CAT for 12061 which works when I use N1MM.
> > Mark KB3Z
> >
> > On Mon, Apr 6, 2026 at 9:10 AM SR Brobakken <sr.brobakken@gmail.com>
> wrote:
> >
> >> But how many slices do you manage to make??
> >>
> >>
> >> Best Regards,
> >> Stein-Roar Zamora Brobakken
> >> sr.brobakken@gmail.com
> >> LB3RE K3RAG
> >> Join me on Slack --
> >>
> https://join.slack.com/t/lb3re/shared_invite/zt-rq7klws5-UEVdjQql2rH0q6bhRFo8dQ
> >>
> >> 6. apr. 2026 kl. 13:11 skrev Mark Griffin <pastormg2@gmail.com>:
> >>
> >>
> >> I haven't gone back to that in a while.I know that I change the radio's
> to
> >> 2 and then make the proper adjustments.
> >> That seems like an alternative to using the Flexradio Driver. But until
> >> somebody gives me some explicit help on every setting I need to make to
> get
> >> it to work I can do that.
> >> Mark KB3Z
> >>
> >> On Sun, Apr 5, 2026 at 9:47 PM Stein Roar Brobakken LB3RE #933 <
> >> post@lb3re.no> wrote:
> >>
> >>> Ahhh
> >>>
> >>> So i know setup kenwood ts2000
> >>> 9600 baudrate
> >>>
> >>> On each of them on other computers.
> >>>
> >>> And setup Two radio configurations.
> >>> Have you tried it?
> >>>
> >>>
> >>> Best Regards,
> >>> Stein-Roar Zamora Brobakken
> >>>
> >>> post@lb3re.no
> >>> LB3RE K3RAG LC0X
> >>> Join me on Slack --
> >>>
> https://join.slack.com/t/lb3re/shared_invite/zt-rq7klws5-UEVdjQql2rH0q6bhRFo8dQ
> >>>
> >>> 6. apr. 2026 kl. 03:36 skrev Mark Griffin <pastormg2@gmail.com>:
> >>>
> >>> SR,
> >>> I tried that with Slice A being Slice A/B and Slice B as being Slice
> C/D.
> >>> But for some reason it does not recognize the B slice as Slice C/D.
> >>> Mark KB3Z
> >>>
> >>> On Sun, Apr 5, 2026 at 9:29 PM SR Brobakken <sr.brobakken@gmail.com>
> >>> wrote:
> >>>
> >>> Hello
> >>>
> >>>
> >>> Try setup 4 slices. I USE 6700
> >>>
> >>> A & B for radio 1
> >>>
> >>> C & D for radio 2
> >>>
> >>>
> >>> I do this for writelog
> >>>
> >>>
> >>> Best Regards,
> >>>
> >>> Stein-Roar Zamora Brobakken
> >>>
> >>> sr.brobakken@gmail.com
> >>>
> >>> LB3RE K3RAG
> >>>
> >>> Join me on Slack --
> >>>
> >>>
> >>>
> https://join.slack.com/t/lb3re/shared_invite/zt-rq7klws5-UEVdjQql2rH0q6bhRFo8dQ
> >>>
> >>>
> >>> 6. apr. 2026 kl. 02:51 skrev Mark Griffin <pastormg2@gmail.com>:
> >>>
> >>>
> >>> I have looked at the written instructions regarding connecting a
> >>>
> >>> transceiver to writelog. And to be honest it is rather confusing
> because
> >>>
> >>> it
> >>>
> >>> seems that nobody has specific setup instructions connecting a
> Flexradio
> >>>
> >>> to
> >>>
> >>> Writelog. Currently I use N1MM Plus, and it works well with my
> >>>
> >>> transceiver.
> >>>
> >>> I have my CAT File which has Com Ports for Slice A and Slice B. In the
> >>>
> >>> setup of N1MM I have the transceiver picked as Flexradio and I
> designate
> >>>
> >>> what Com Port it is to look for that particular Slice. But it seems
> that
> >>>
> >>> with Writelog when I load the New Version of Writelog Flex Driver it is
> >>>
> >>> not
> >>>
> >>> reading that I have two slices. I think one of the issues is because in
> >>>
> >>> the
> >>>
> >>> Port Setup when I use Flexradio it does not ask me for a Com Port. If I
> >>>
> >>> pick a Kenwood TS-2000 then it asks for a Com Port. And no doubt the
> >>>
> >>> Software and Transceiver would communicate with each other. But at
> >>>
> >>> present
> >>>
> >>> either there is another setting that I haven't made yet or know of to
> get
> >>>
> >>> with the Flexradio Driver to communicate properly for both Slice A and
> >>>
> >>> Slice B of my Flexradio. I don't know if the people at Writelog know
> >>>
> >>> which
> >>>
> >>> of their users are using the software with a Flexradio. And also, what
> >>>
> >>> are
> >>>
> >>> they turning on or turning off or whatever to get it to communicate
> >>>
> >>> properly. I have come to the conclusion that perhaps Writelog cannot
> >>>
> >>> operate properly with a Flexradio with two slice receivers. I am trying
> >>>
> >>> to
> >>>
> >>> be patient with the help that I have received. But really what I need
> is
> >>>
> >>> a
> >>>
> >>> step by step process on connecting Writelog to a Flexradio. A total
> >>>
> >>> breakdown of what needs to be chosen and what doesn't need to be chosen
> >>>
> >>> in
> >>>
> >>> the the items for setup and whatever. Is there anyone out there in
> >>>
> >>> Writelog
> >>>
> >>> Land that can help me with this? If not, then I just lost 30.00 trying
> a
> >>>
> >>> software that evidently will not work with my Flexradio.
> >>>
> >>> Mark Griffin, KB3Z
> >>>
> >>> _______________________________________________
> >>>
> >>> WriteLog mailing list
> >>>
> >>> WriteLog@contesting.com
> >>>
> >>> http://lists.contesting.com/mailman/listinfo/writelog
> >>>
> >>> WriteLog on the web: http://www.writelog.com/
> >>>
> >>>
> >>> _______________________________________________
> >>> WriteLog mailing list
> >>> WriteLog@contesting.com
> >>> http://lists.contesting.com/mailman/listinfo/writelog
> >>> WriteLog on the web: http://www.writelog.com/
> >>>
> >>>
> > _______________________________________________
> > WriteLog mailing list
> > WriteLog@contesting.com
> > http://lists.contesting.com/mailman/listinfo/writelog
> > WriteLog on the web: http://www.writelog.com/
>
>
>
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|