Also Rick,
In my set-up, the first rotor is physically off north and I have to correct
it in the .ini file. The second rotor is fine, but I have not found a way to
do the correction independently (still looking).
In the future some sort of radio to rotor mapping may be of use to me as I
am considering a 40 meter dipole or beam on a separate rotor.
73 Eric - VE3GSI
> -----Original Message-----
> From: Rick Tavan N6XI
>
> I use "Antenna to [nnn] Azimuth" a lot. It would be very nice
> to have a companion function that turns the antenna to the
> long-path bearing (+/- 180) which is currently displayed but
> not used for rotor control.
>
> Also useful would be +90 and -90. That would be helpful for
> antennas that are at right angles to the others. I don't have
> any at present but many people do.
>
> Finally, it would be helpful if these rotor control functions
> were accessible when the focus is on the other rig QSO entry
> fields. Right now, WL assumes there is exactly one rotor
> dedicated to each rig. But many people have multiple antennas
> on one mast and use them with both rigs. It would be great to
> tie the two rigs to the one rotor. There are user interface
> subtleties here that merit careful thought and a two-phase
> implementation might provide 80% of the functionality with
> the first 20% of the work!
>
> 73,
>
> /Rick N6XI
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|