WriteLog
[Top] [All Lists]

[RTTY] Correction: WriteLog + 75 Baud

To: <rtty@contesting.com>, <writelog@contesting.com>
Subject: [RTTY] Correction: WriteLog + 75 Baud
From: "Don Hill AA5AU" <aa5au@bellsouth.net>
Date: Sun, 6 Jun 2010 11:12:16 -0500
List-post: <rtty@contesting.com">mailto:rtty@contesting.com>
WriteLog DOES transmit FSK and AFSK 75 Baud RTTY using the MMTTY plug-in for 
WriteLog.

However, it doesn't work as you normally think it would.  In my testing, I 
brought up my normal RTTY setup using the MMTTY plug-in
at 45 baud.  I then attempted to change the baud rate by going to the "Mode" 
menu in Rttyrite and selecting "75 baud (100 WPM)
Baudot".  When I transmitted, the rate remained at 45 baud.

In order to change from 45 to 75 baud transmission, I had to go to the "Option" 
menu in the MMTTY RTTY Control panel and select
"Setup(O)".  In Setup, I had to go to the Decode tab and change BaudRate to 75.

I was then able to transmit 75 baud RTTY using WriteLog and the MMTTY plug-in 
to WriteLog.  This worked with my simple transistor
FSK interface and my microHAM microKEYER.

I working on a web page on this subject.  I will announce it when it's finished.

73, Don AA5AU
http://www.aa5au.com
http://www.rttycontesting.com 

_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty

<Prev in Thread] Current Thread [Next in Thread>