Use the "Address override" as documented in the WriteLog Help File
(AKA, "WriteLog Manual"). The process is completely documented -
used it for years with my IC-706mkIIg which has never been directly
supported.
73,
... Joe, W4TV
On 5/30/2016 6:15 PM, Ray Day wrote:
Hi WL folks,
I'm gradually getting my station re-set up using the new Icom IC-7300.
So far so good with the radio talking to N3FJP's ACLog, etc., but I don't
see in WL (v12.03G) a choice in setup/ports for the 7300.
I'm using the microKEYER II interface and have it set up for the 7300, 9600,
CI-V address 94 in "router ports" and in system settings I show 9600 and
address 6A. All's well there. MicroKEYER MK2 and radio get along very well.
But WL doesn't have a radio selection line for the 7300 (I've set the
setup/ports screen as COM14, 9600, polling checked, and NO for comm PTT).
I've tried a few other Icom rigs in that slot to see if they might work, but
so far, no joy - I can't see the rig mode/freq in the Log Entry window..
Does anybody have experience as to what I should put in as a radio choice in
WL so the 7300 will be happy?
Thanks in advance,
Ray N6HE
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|