I run 2s1p PCI NetMOS i/o cards assigned to com3 and 4 fine with WL using
those ports- no problems of any kind. I recently had some DMA+IRQ conflicts
(not WL-related) I had to work myself through and found the combination of
the {My Computer - Control panel - System - Device manager - [device type]
- [specific device] - resources} and the {start - Programs - Accessories -
System Tools - System Information - Hardware Resources - [specific device]
- [advanced information]} VERY helpful. Those tools helped me find
conflicts and resolve them.
I have never run across a WL i/o problem yet that was actually caused by
WL. YMMV.
Jerry W4UK
At 18:40 1/7/04, John Griswold wrote:
A few days ago I wrote about problems I was having with WriteLog and COM2
talking to my radio. I won't go through a blow-by-blow (email me if you
want that), but it boils down to me using one of the add-on ports as COM2.
It seems that certain programs, WriteLog apparently in that group, don't
like COM1, COM2, COM3, and COM4 being mapped in from a PCI bus card.
<SNIP>
73,
John / KB1HDO
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|