2Tone *does not use the UART interface* - it is much like WriteLog's
Software generated FSK. To use 2Tone with microHAM's "keyers", you
need to *uncheck* the "stuff" box in microHAM Router, set 2Tone to
output FSK on TxD and use RTS for PTT (check the PTT box in the FSK
port on Router).
If I select Headset Earphone (3-microHAM CODEC), which is my normal
setting, and then click OK, the Transmit Setting box does not retain
my CODEC selection, but jumps back to the first one in the list. I
cannot make the microHAM CODEC the selection to use for TX.
The *audio* output is *only used for AFSK*. If you select FSK, the
audio output will not be set/used/saved.
73,
... Joe, W4TV
On 2014-08-14 3:37 PM, Gary AL9A wrote:
Just downloaded 2Tone 14.08c from Don's web site and it appears there is
still a problem. The main 2Tone window set to 14.08c will key the
radio, but it's not using the MKII as I don’t see the text being sent
printing on the MKII LCD. Also both of my 2tone clone windows don't
print what is being sent as they used to.
In checking all my settings I notice that on the 2Tone Settings window
in the Transmit Setting box the selection is the first one in the list,
Speakers (SB Xtreme Audio Notebook) which is a slot mounted sound card
on my PC. If I select Headset Earphone (3-microHAM CODEC), which is my
normal setting, and then click OK, the Transmit Setting box does not
retain my CODEC selection, but jumps back to the first one in the list.
I cannot make the microHAM CODEC the selection to use for TX.
Looks like I'll be going back the MMTTY and XMMT and 2Tone still has
some issues, at least for me.
73,
Gary AL9A
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|