Barry, and All
I can follow Barry's procedure below and I find the Microphone Balance
select is NOT enabled. Enabling it will allow the decoding to start working.
BUT, if I go back to WL and click in the logging area to enter a call, the
audio dies and I find the Microphone Selected is disabled again. With both
on screen, I can watch the check go away when I click in WL and see the
audio come back when I select the Microphone Balance.
I'm sure if it's a WL issue, Wayne will have it fixed shortly. If it's
not, he can mostlikely explain what is happening.
Don
At 03:45 PM 10/27/2002 +0000, Barry wrote:
>Don,
>Go into the soundcard setup, click Options|Properties, then Recording
>and OK. Double check the selected audio input and the slider (Line In
>vs. Mic). Note that you have to be in Recording and not Playback to set
>these, even if they show up in Playback.
>Barry W2UP
>
>
>On 27 Oct 2002 Don Winn wrote:
>
> > I have developed a problem with my SB16 soundcard working with
> Writelog. It
> > has worked for several years so it's not a compatibility issue.
> >
> > If I setup for using the soundcard for RTTY, CW or PSK decoding, I get no
> > response in the RTTY or tuning window. If I use another program (MSN's
> > Messenger Service) and I run their Audio Tuning Wizard, I can then go back
> > to WL and receive fine.
> > When working and copying RTTY, If I click in the logging area, it dies and
> > I have to go back to the MSN Wizard to get it back.
> >
> > I have reloaded WL 10.36G and no help. OS is WINDOWS 98SE
> >
> > Anyone had a similar problem??
> >
> > Don AF4Z
> >
> >
> > _______________________________________________
> > WriteLog mailing list
> > WriteLog@contesting.com
> > http://lists.contesting.com/mailman/listinfo/writelog
>
>--
>Barry Kutner, W2UP Internet: w2up@mindspring.com
>Newtown, PA Frankford Radio Club
>
|