--=====================_30046734==_.ALT
Content-Type: text/plain; charset="us-ascii"; format=flowed
Well it did get posted and it was in the help file. I never looked thinging
it was asked since it was not but thanks for informing us all.
At 21:46 10/30/2001, dr wrote:
>Doug,
>
>Under the Setup menu click on the CW/RTTY/SSB messages...
>selection. Please find
>and click on the HELP box.
>You will find the following line:
>
>The memories have the following special properties if there is a "%" character
>followed by a:
>
>digit n (in the range 1 through 5)
>the current QSO number is substituted for the % when that message is sent. The
>number sent will be preceded by enough "T" characters in Morse (or "0"
>digits in
>RTTY) to ensure that at least n characters are sent in the number. For
>example,
>if the sequence number is one, and there is a "%3" in the F3 field, then
>pressing
>F3 will send "TT1". This is for contests that require a "three digit serial
>number".
>
>I hope that this helps.
>
>Dave KG0US
>
>
>DougN1@aol.com wrote:
>
> > Hi all,
> >
> > I'm a new Writelog user. I believe that I have everything working and
> want to
> > give it a trial run in the Ukrainian this weekend. WL does not have a
> > Ukrainian contest module. I downloaded the module from the third party site
> > and installed it. I have set up my F keys, however, I don't see my serial
> > number being sent. I also tried with the SARTG contest which has the same
> > exchange requirements. Same result.
> >
> > HELP says: "The field labeled SEQ in the Entry window shows you the serial
> > number that WL will send as a RTTY message and record it in the log as the
> > transmitted serial number."
> >
> > Yes, the SEQ number increments up one for each QSO logged. Most rules
> require
> > a three digit number starting with 001. SEQ does not do that, at least not
> > until 100.
> >
> > It appears that I am missing something in my exchange message that will
> > include the serial number.
> >
> > Any help will be appreciated.
> >
> > Thanks.....Doug K6HGF
> > _______________________________________________
> > WriteLog mailing list
> > WriteLog@contesting.com
> > http://lists.contesting.com/mailman/listinfo/writelog
>
>_______________________________________________
>WriteLog mailing list
>WriteLog@contesting.com
>http://lists.contesting.com/mailman/listinfo/writelog
Gil Baron http://members.home.com/gbaron
W0MN 44.08208 N 92.51263 W 1055'
"Baila como nadie te ve"
--=====================_30046734==_.ALT
Content-Type: text/html; charset="us-ascii"
<html>
Well it did get posted and it was in the help file. I never looked
thinging it was asked since it was not but thanks for informing us
all.<br><br>
At 21:46 10/30/2001, dr wrote:<br>
<blockquote type=cite class=cite cite>Doug,<br><br>
Under the Setup menu click on the CW/RTTY/SSB messages...
selection. Please find<br>
and click on the HELP box.<br>
You will find the following line:<br><br>
The memories have the following special properties if there is a
"%" character<br>
followed by a:<br><br>
digit n (in the range 1 through 5)<br>
the current QSO number is substituted for the % when that message is
sent. The<br>
number sent will be preceded by enough "T" characters in Morse
(or "0" digits in<br>
RTTY) to ensure that at least n characters are sent in the number. For
example,<br>
if the sequence number is one, and there is a "%3" in the F3
field, then pressing<br>
F3 will send "TT1". This is for contests that require a
"three digit serial<br>
number".<br><br>
I hope that this helps.<br><br>
Dave KG0US<br><br>
<br>
DougN1@aol.com wrote:<br><br>
> Hi all,<br>
><br>
> I'm a new Writelog user. I believe that I have everything working
and want to<br>
> give it a trial run in the Ukrainian this weekend. WL does not have
a<br>
> Ukrainian contest module. I downloaded the module from the third
party site<br>
> and installed it. I have set up my F keys, however, I don't see my
serial<br>
> number being sent. I also tried with the SARTG contest which has the
same<br>
> exchange requirements. Same result.<br>
><br>
> HELP says: "The field labeled SEQ in the Entry window shows you
the serial<br>
> number that WL will send as a RTTY message and record it in the log
as the<br>
> transmitted serial number."<br>
><br>
> Yes, the SEQ number increments up one for each QSO logged. Most
rules require<br>
> a three digit number starting with 001. SEQ does not do that,
at least not<br>
> until 100.<br>
><br>
> It appears that I am missing something in my exchange message that
will<br>
> include the serial number.<br>
><br>
> Any help will be appreciated.<br>
><br>
> Thanks.....Doug K6HGF<br>
> _______________________________________________<br>
> WriteLog mailing list<br>
> WriteLog@contesting.com<br>
>
<a href="http://lists.contesting.com/mailman/listinfo/writelog";
eudora="autourl">http://lists.contesting.com/mailman/listinfo/writelog</a><br><br>
_______________________________________________<br>
WriteLog mailing list<br>
WriteLog@contesting.com<br>
<a href="http://lists.contesting.com/mailman/listinfo/writelog";
eudora="autourl">http://lists.contesting.com/mailman/listinfo/writelog</a></blockquote>
<x-sigsep><p></x-sigsep>
<font face="Courier New, Courier">Gil Baron
<a href="http://members.home.com/gbaron";
eudora="autourl">http://members.home.com/gbaron</a><br>
W0MN 44.08208 N 92.51263 W 1055'<br>
"Baila como nadie te ve" <br>
</font></html>
--=====================_30046734==_.ALT--
|