Hi Don,
Well, it's a long story (of course) since I have been using it for
many years. I'll try to keep it short.
The short story is that it is now working again on CW after many
reboots and unplugging and replugging all the connections to the
laptop that runs Writelog. We are not sure just what made it work
again but it is. The issue was that I could not re-select CW in the
Rttyrite mode window, the CW was greyed out. After much rebooting and
replugging the com port adapters. The selection for CW is back. and
all is well again for CW.
The third port I used for rtty has been unplugged for some time now as
I have not been on RTTY :-( . So this weekend
was a problem. I have not tried putting it into rtty (serial adapter
port remains unplugged for now). I'll be doing more
work to try it again but I am somewhat gun-shy now. Running Windows 7
pro.
The longer story involves version 12. I am also working to move to
that version in a newer laptop and still am having issues with making
it look like my old interface with Writelog in version 11.
I'll let you and the list know as I progress there.
Alan, W1CCE
-----Original Message----- From: Don Hill AA5AU
Sent: Monday, January 07, 2019 11:12
To: 'Alan Marshall' ; writelog@contesting.com
Cc: david.marshall@rcn.com
Subject: RE: [WriteLog] Rttyrite problem - version 11.24H
Please explain how you typically set up Rttyrite for CW and what is it
that
are not able to do now?
To use Rttyrite on CW with V11 (it's the same with V12), go to the TU
Type
and select Sound Board AFSK. Typically this brings up the WriteLog RTTY
Receiver. To change to CW, go to the Mode menu in Rttyrite and select CW.
The WriteLog RTTY Receiver changes to the WriteLog CW Receiver. If all
that
works and you aren't receiving anything, then you need to check to see
which
Sound board is selected. Go to the WriteLog V11 program folder from the
Start menu and select Sound board mixer control. There is where you
set "rec
to PC" to the sound board you have your receiver connected to.
I prefer using the multi-channel CW decoder. You can try to see if that
works by going to the "Windows" menu in WriteLog and selecting "CW
Display
(Left)".
Don AA5AU
-----Original Message-----
From: WriteLog [mailto:writelog-bounces@contesting.com] On Behalf Of Alan
Marshall
Sent: Sunday, January 6, 2019 12:47 PM
To: writelog@contesting.com
Cc: david.marshall@rcn.com; acm@ultranet.com
Subject: [WriteLog] Rttyrite problem - version 11.24H
Help!
I have broken my install of Writelog version 11.24H.
This happened while trying to set up for the RTTY
Roundup contest this past weekend. I can no longer
get the Rttyrite window to go back to CW mode. This
is my main mode of operation for my CW operation of
my station. Is there some way for me to get back to
CW mode on that window since nothing will come out
of RTTY mode; neither the Rttyrite window or the
Writelog rtty window will go back to CW mode.
I am running under Windows 7 Pro. My radio is Icon
756 Pro II.
I do have version 12.32 on another machine that is
interfaced to the Pro 2 and it is running Windows
10. I have not been able to make the transition to
that machine.
Any suggestions gratefully accepted.
Alan, W1CCE and David, KB1EDE (my brother)
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/