What are you using for an interface?
Are you using FSK or AFSK?
Are you using a hardware serial port or a USB to serial converter?
MMTTY always generates PTT on both the RTS and DTR lines of the
port used for FSK. If you are using AFSK you can assign a port
in RTTYrite and MMTTY will use it for PTT even though it does not
provide FSK on the TxD line.
> I have a feeling this is a problem for me with the later versions of
> WL, as it was working o.k. before. I guess I could bring back an
> earlier version to be sure.
What do you have selected for CW - are you using a K1EL WinKey or
"computer generates?"
73,
... Joe, W4TV
On 8/21/2010 10:27 AM, Dave Earnest wrote:
> No PTT!
>
> Running WL 10-78K and latest MMTTY plug-in.
>
> MMTTY works Fine in stand alone. Rig control o.k. on one comport and
> PTT OK on another comport.
>
> No PTT using Rttyrite!
>
> MMTTY is there under TU and correct comport is selected.
>
> I have a feeling this is a problem for me with the later versions of
> WL, as it was working o.k. before. I guess I could bring back an
> earlier version to be sure.
>
> Also, in the past, when computer was booting up, I would get a few
> transmitter PTT actions as the initializing was going on. That is not
> happening now.
>
> Help!
>
> Dave Earnest, K7JJ k7jj@arrl.net
> _______________________________________________ WriteLog mailing
> list WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog WriteLog on the
> web: http://www.writelog.com/
>
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|