WriteLog
[Top] [All Lists]

Re: [WriteLog] WriteLog - MK II statup problem

To: writelog@contesting.com, Gary AL9A <al9a@mtaonline.net>
Subject: Re: [WriteLog] WriteLog - MK II statup problem
From: "Joe Subich, W4TV" <lists@subich.com>
Date: Fri, 23 Jul 2010 11:42:41 -0400
List-post: <writelog@contesting.com">mailto:writelog@contesting.com>
 > I'm trying to setup WriteLog V10.77H for the IOTA contest this
 > weekend.  Whenever I start WL in with my IC-7600 in USB I get
 > the error message "Failed to start recording loop.  Is the sound
 > board in use?"

This is normal with the new WriteLog audio interface.  Dismiss the
error message (it occurs because the mic input is active) and
proceed.

 > When I click the error message to close it WL starts up and the
 > radio goes into TX.  Must either shut down the radio or WL to
 > stop it.

You have a configuration mismatch between WriteLog and Router ...
Writelog is probably asserting RTS on the CAT port while you have
PTT defined on that port in Router.  You will either need to
disable PTT on the CAT port in Router or use "RTS/DTR override"
in the [RIGS] section of writelog.ini to suppress initialization
of DTR/RTS on the radio port.   See [RIGS] in the WriteLog help
file.

73,

    ... Joe, W4TV

PS. It is not necessary to copy BOTH lists.  This is approrpiate
     for the WriteLog list.


On 7/23/2010 3:17 AM, Gary AL9A wrote:
> I'm trying to setup WriteLog V10.77H for the IOTA contest this weekend.
> Whenever I start WL in with my IC-7600 in USB I get the error message
> "Failed to start recording loop.  Is the sound board in use?"  When I click
> the error message to close it WL starts up and the radio goes into TX.  Must
> either shut down the radio or WL to stop it.  I'm running Vista Home Premium
> with the MK II.  The WriteLog sound board mixer is configured correctly.  I
> ran the NAQP RTTY last weekend with no problem and have used the MMTTY
> plug-in today with no problem.  I've rebooted the computer, shut down the MK
> II and repowered it up, disconnected the USB cable all to no avail.  What am
> I missing?
>
> 73,
> Gary AL9A
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/
>
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/

<Prev in Thread] Current Thread [Next in Thread>