WriteLog
[Top] [All Lists]

Re: [WriteLog] Belkin F5U409 Question.

To: jim@w8wts.com
Subject: Re: [WriteLog] Belkin F5U409 Question.
From: "Mike McCarthy, W1NR" <lists@w1nr.net>
Date: Wed, 14 Feb 2007 12:57:12 -0500
List-post: <mailto:writelog@contesting.com>
You might try 2 stop bits on the COMM port to see if rig control starts 
working.  I hear that is a common problem with Yeasu serial comm.

Mike, W1NR

James M. Galm, W8WTS wrote:
> Thanks for the input, Mike.  It was VERY relevant!  
>
> Based on Mike's suggestion, I disabled rig control (No Rig in all serial
> port slots) and set the frequency and mode manually.  With that setup, the
> Belkin F5U409 SENT SERIAL PORT DTR CW PERFECTLY, either from the Alt-k
> dialog box or from the F key memories.  
>
> That is a very important result, since it shows that of the two problems
> that I originally described (no rig control and no DTR CW), the CW problem
> is nothing but a direct consequence of the rig control problem.  Now that
> serial port DTR CW is solved, I will try to focus on why rig control doesn't
> work.  
>
> I don't use a rig interface box, since Yaesu FT1kMP has a true RS-232 serial
> port on the back.  There is a Maxim MAX232CWE chip on the control PCB in the
> FT1kMP, so the signal levels on TxD and RxD are perfectly compatible with
> PCB serial ports.  
>
> Thanks again for the tip, Mike.  That's just the kind of information that
> makes working with a large and knowledgeable user group successful.  
>
> 73, Jim, W8WTS.  
>
> -----Original Message-----
> From: Mike McCarthy, W1NR [mailto:lists@w1nr.net] 
> Sent: Tuesday, February 13, 2007 8:28 AM
> To: jim@w8wts.com
> Cc: writelog@contesting.com
> Subject: Re: [WriteLog] FW: Belkin F5U409 Question.
>
> One thing that I have noticed is that WriteLog memories via the F keys are
> dependent on the mode read from the rig.  If the mode is not CW, the Fx keys
> don't work.  That is true for RTTY also.
>
> What type of rig interface are you using?  I have found that W1GEE
> interfaces don't work with USB cables that use the Prolific PL-2302 chips.
> Must have something to do with deriving power from the serial port, but I
> never did look real close at it.  A standard Kenwood IF-232 has no problem
> with it.  These chips also don't do FSK RTTY properly.  I have found them
> used in the RocketPort II and USBGear dongle cables.
>
> I have a Silicon Labs CP2102 development board coming in a few days that,
> from the data sheet, might be programmed to work properly.
>
> You might be better off getting one of the USB rig interface boxes.  
> They are more expensive, but at least they are designed to work with
> WriteLog and the various rigs.
>
> 73 de Mike, W1NR
>
> James M. Galm, W8WTS wrote:
>   
>> Here's a very interesting new result from tinkering with my Belkin 
>> F5U409 USB/serial converter.
>>  
>> I posted earlier that it does not do rig control with my FT1KMP and it 
>> does not send WriteLog generated DTR CW.  More testing showed that it 
>> DOES send WriteLog generated DTR CW when sent from the Alt-k keyboard
>>     
> window.
>   
>> Characters typed into the Alt-k keyboard window send correctly from 
>> the Belkin F5U409 DTR signal.  Characters sent from the CW memories 
>> never cause the Belkin F5U409 DTR to change state.
>>  
>> Perhaps this fact could help those with more detailed knowledge of how 
>> WriteLog interfaces with its serial ports to understand why the Belkin 
>> F5U409s fail to do rig control or send CW from the memories.
>>  
>> All insight is appreciated.  
>>  
>> 73,
>>  
>> Jim, W8WTS.  
>>
>>   _____
>>
>> From: GARY ELLIOT [mailto:k7ox@msn.com]
>> Sent: Sunday, February 11, 2007 7:57 PM
>> To: James M. Galm, W8WTS
>> Subject: Re: [WriteLog] Belkin F5U409 Question.
>>
>>
>> Jim,
>>  
>> Let me know if you get it to work...I have a F5U409 and could not get 
>> it to talk for rig control to a Icom 756 PRO. Installs just fine and 
>> the comm port shows up in Device Manager as COM 3 but the radio will not
>>     
> talk to it.
>   
>> About ready to give it up and look for a PCI serial card.
>>  
>> Gary
>>  
>>  
>>
>>  
>>
>> _______________________________________________
>> WriteLog mailing list
>> WriteLog@contesting.com
>> http://lists.contesting.com/mailman/listinfo/writelog
>> WriteLog on the web:  http://www.writelog.com/
>>
>>
>>   
>>     
>
>
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/
>
>
>   

_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/

<Prev in Thread] Current Thread [Next in Thread>