Are all of the firmware revs on the PIEXX boards the same? Have you
tried moving one of the non-working rigs to a PC/rig combo that does work?
Mike, W1NR
W8AV@aol.com wrote:
> I have a six station setup in my shack running 6 Kenwood TS-930's with PIEXX
> boards with Writelog. The computers are essentially the same (Dell GX
> series PC's) all running the same version of Writelog (10.55d) on a Windows
> XP
> professional platform. Three of the stations work just fine when I run
> split
> frequency on the radio putting an "S" in the networked frequency window to
> denote that the radio is split. The other three do not. When I attempt to
> transmit on the split frequency, Writelog commands the receive VFO to change
> to the
> transmit VFO's frequency in the three problem radios. Initially everything
> was set up exactly the same for all six radios. The radios are keyed
> through
> an LPT port employing USERPORT since XP does not recognize LPT ports.
>
> I next tried various setup conmfigurations in the ports setup menu and have
> even swapped com ports for the radio control with no luck on the problem
> stations. If I un-check the polling box in the ports menu, everything works
> fine. What am I doing wrong? Do I need to change something in the
> WRITELOG.INI
> file? This is not a disastrous situation, just a giant pain when I am
> trying
> to work someone split in a contest.
>
> I would be grateful to anyone who may be able to shed some light on this and
> provide me with some ideas.
>
> 73.........de Goose, W8AV
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web: http://www.writelog.com/
>
>
>
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|