Joe Stepansky wrote:
> 1. Using a 9-pin connector, I took a line from pin 4 (DTR), through a 1K
> resistor into the base of a 2N2222 transistor.
> 2. Took a line from pin 5 (GND) to the 2N2222 emitter and on to the ground
> of the key jack.
> 3. A line from the 2N2222 collector to the positive terminal of the CW key
> jack.
I would take a look at the DTR voltage after loading the program and
see what it's voltage is. Win98 sets DTR HIGH after initialization,
which would explain why your
rig keys. Also, I have found a 1K resistor puts a little too much
voltage on the base of the 2N2222. I use 3300 to 4700 ohms and it
works fine.
You may be just burning out the 2N2222. If the Collector to Emitter
junction shorts, the rig will key.
73
Ed
|