For the gentleman having interface problems, under the help menu / help topics
/ select find tab and search for the word ICOM. Select the Rig Interfacing
title in the click a topic window. You should see different default address
shown for several ICOM rigs. By default, Writelog usually expects you to use
these addresses for the rig specified. This can be changed but I do not
remember how or where.
For the gentlemen using two ICOM rigs connected to writelog, it appeared from
your description that you were using two CT-17 interfaces using a two separate
COM ports (one for each CT-17). However, while I have not done this before,
it is my understanding that you can operate several ICOM rigs simultaneously
using just one CT-17 thereby using only one COM port.
Anyway,
Best of Luck,
Dave KG0US
WA9ALS - John wrote:
> > But the address I am talking about is the Writelog address - not the
> address
> > of the radio. The CI-V interface requires that both the radio and the
> 'other
> > device' (Writelog) have an address.
>
> Can you be more specific? I don't think that's correct. You just hook it
> up, set the radio to 48H. Then you just tell Writelog which COM port the
> CT-17 is on. That's all I did for mine to work FB.
>
> --
> WWW: http://www.writelog.com/
> Submissions: writelog@contesting.com
> Administrative requests: writelog-REQUEST@contesting.com
> Problems: owner-writelog@contesting.com
--
WWW: http://www.writelog.com/
Submissions: writelog@contesting.com
Administrative requests: writelog-REQUEST@contesting.com
Problems: owner-writelog@contesting.com
|