Thanks Joe for the input...
I previously had 05-07 CAT RTS set to DISABLE and 05-08 CAT TOT set to 1000ms,
also I have 05-05 CAT RATE set to 19200 (which is the same as WL)
In WL am using Rig Type FT-991. I could not find a selection for the Rig Type
FT-891 in WL.
Have setup with N1MM+ with the rig type FT-891 and DTR: Always Off, RTS: Always
Off, and baud rate 19200 and it seems to be functioning fine.
Also setup WSJT-X with these parameters working with JTAlert and N3FJP--ACLog,
and that setup appears to be working fine as well. I have used this setup for
Digital FT8/FT4, but have used WL and DigiRite for some moderate contesting.
anymore suggestions?
Jim/KC4HW
----- Original Message -----
From: Joe Subich, W4TV <lists@subich.com>
To: <writelog@contesting.com>
Sent: 7/25/2021 10:00:34 AM
Subject: Re: [WriteLog] FT-891 Setup in Writelog
________________________________________________________________________________
Try setting CAT RTS (Menu 05-08) to DISABLE. If for some reason
WriteLog is not setting RTS on the CAT port to HIGH (ON), the
newer Yaesu radios (since FTdx9000 and FT-2000) will not send
CAT data to the computer with their default configuration.
You may also want to set 05-07 CAT TOT to 100 or 1000 ms depending
on how many parameters the logging program requests at one time.
73,
... Joe, W4TV
On 2021-07-25 9:38 AM, Jim Johnson wrote:
> No sir! I don't think it is, because I can spin the dial and the frequency
> changes on the radio but not WL. Actually, it is fully functional with
> another logging program.
>
> ----- Original Message -----
> From: Keith Beebe W3KB <keith@w3kb.net>
> To: Jim Johnson <jim@kc4hw.com>, <writelog@contesting.com>
> Sent: 7/25/2021 7:30:57 AM
> Subject: Re: [WriteLog] FT-891 Setup in Writelog
> ________________________________________________________________________________
>
> Is it possible you have the dial "locked" on the rig itself? Unlock it, if
> it is.
>
> I had that happen to me before.
>
> Keith W3KB
>
>
> -----Original Message-----
> From: WriteLog <writelog-bounces@contesting.com> On Behalf Of Jim Johnson
> Sent: Saturday, July 24, 2021 11:24 PM
> To: writelog@contesting.com
> Subject: [WriteLog] FT-891 Setup in Writelog
>
> I am having some trouble setting up the rig control for a FT-891 using
> Writelog 12.59F.
>
> I selected FT-991 from the Rig Type and the enhanced port on my laptop which
> is Com7, baud rate 19200 that matches the radio menu setting, poll checked
> and Comm PTT NO.
>
> I can enter a frequency in the QSO entry window and it will move the radio to
> that frequency and display the frenquency properly. But turning the VFO know
> does not have any effect on the displayed frequency.
>
> Anybody, have any suggestion for this?
>
> Jim/KC4HW
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|