On 8/27/2017 12:07 AM, Randy Thompson K5ZD wrote:
The MK2R+ has two sound cards, but it is not clear which one is being
used for what. I am using the USB Audio Codec.
Receive audio is routed to "USB Audio CODEC". USB Voice CODEC is used
for the microphone (DVK recording and playback).
And the digital settings for digital (BBB, audio codec SC2). Radio 1
is set to Left. Radio 2 is set to right.
The settings on the Audio Switching tab are used for *transmit*.
Receive audio settings are controlled by the "Functions" tab. Note:
any changes in Functions must be saved ("Store") to the unit and
activated ("Apply") before they will take effect.
> I want to have dual receiving from the Line Out of the K3 radios.
> When I try to do that, I am only able to hear one radio (radio 2).
What do you mean by having dual receiving from the Line Out of the K3
radios? Do you want to decode the main receiver of each K3 at the
same time or do you want decode main and sub of one of the radios?
USB Audio CODEC has two inputs - left and right. They can be used for
any two of the four audio sources - left radio main, left radio sub,
right radio main, right radio sub - depending on the selections in
the "Recording/Digital" Section of the Functions tab (or manually with
the Left/Right buttons in the Recording/Digital area of the front
panel).
73,
... Joe, W4TV
On 8/27/2017 12:07 AM, Randy Thompson K5ZD wrote:
I have been using the SCC RTTY Contest to get setup for SO2R using a
recently purchased MK2R+. I have things working for CW and SSB so just RTTY
left to work out.
Using Windows 10, WriteLog 12.20 with XMMT for RTTY. Radios are two
Elecraft K3. Using the microHam cables to connect from the MK2R+ to the
radios.
I can transmit FSK on both radios. I can receive on one or both radios when
I use the WYH setting (the sound card hears what I hear in the headphones).
However, I want to have dual receiving from the Line Out of the K3 radios.
When I try to do that, I am only able to hear one radio (radio 2).
The MK2R+ has two sound cards, but it is not clear which one is being used
for what. I am using the USB Audio Codec. And the digital settings for
digital (BBB, audio codec SC2). Radio 1 is set to Left. Radio 2 is set to
right.
Have spent several hours trying things to no avail. Open to any
suggestions.
Randy, K5ZD
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|