Put a callsign in the Entry window then click Antenna to Azimuth and it
should turn to a direction based on the callsign. For the idiom press you
need to set the rotor type to DCU=1. If you look on my website there is a
little utility that will give you more directional control over the antenna
with WriteLog (RFW).
Keith Regli (K7KAR)
mailto:keith@kregli.com
http://www.kregli.com
-----Original Message-----
From: writelog-bounces@contesting.com
[mailto:writelog-bounces@contesting.com] On Behalf Of roofus
Sent: Monday, July 19, 2004 11:26 AM
To: WriteLog@contesting.com
Subject: [WriteLog] Rotor control
I am using a YAESU G-1000 DXA rotor with the Idiom Press computer interface
and have it working on my daily logging programs. I could not find much in
the WL help files other than setting the com port which I have done and the
"Antenna To This Azimuth" is no longer grayed out. What do I need to do to
make the rotor turn?
Thanks,
Dennis AB8NI
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|