What does LOGic have to do with WriteLog?
What mode(s) are you going to operate using WriteLog - SSB, PSK, RTTY,
and/or CW?
If you are going to operate RTTY, are you going to use AFSK or FSK?
Are you going to be using rig control (CIV)? If so, do you need a CIV
interface for that, or is it built-in to your rig? (eg 1000MP)
What type(s) of PTT input does your rig have? Can you use CIV PTT or do you
need an interface?
You need to thoroughly understand these operating goals and considerations
before you start wiring anything. For about $5 you could have used switches
made of 1 resistor and 1 transistor from RS and skipped the RigBlaster
alltogether, but that's an old story.
When you answer the above questions, I'm sure there are many on this list
that would be happpy to help get you going. 73 - John, WA9ALS
----- Original Message -----
From: "tad danley" <tdanley@sbcglobal.net>
To: <WriteLog@contesting.com>
Sent: Saturday, July 26, 2003 9:19 PM
Subject: [WriteLog] getting started questions
>
> I just ordered the WriteLog CD and plan to use it with LOGic 6, both
> will be here in a few days. I also have a RigBlaster Pro on the way.
> The PC is a Dell pentium 4 with Windows xp. Any suggestions on what I
> should install and get working first? I'm thinking the RigBlaster
> should be interfaced last, but don't know whether WriteLog or LOGic
> should be installed first.
>
> Thanks in advance and 73,
>
> --
> Tad Danley, K3TD
>
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
>
>
|