Dick,
> When I fire up WriteLog 10.42D and configure the ports, I
> have selected COM6 in the RTTYrite window and have checked
> Software generated FSK DTR.
Do not use "Software generated FSK." Treat MK2R+ and Router
as if they were a hardware UART. Check "strict BPS" on the
FSK port of Router and add two or three extra spaces at the
end of the Writelog macro (if using RTTrite).
If using MMTTY, do not use "Software generated FSK." In the
MMTTY plug-in configuration select "Sound + COM-TxD" or
"COM-TxD" on the Misc tab or the MMTTY set-up screen. Then
click "USB Port" and select "C: Limiting Speed" so MMTTY will
pace the characters properly.
73,
... Joe Subich, W4TV
microHAM America
http://www.microHAM-USA.com
http://groups.yahoo.com/group/microHAM
support@microham.com
> -----Original Message-----
> From: writelog-bounces@contesting.com
> [mailto:writelog-bounces@contesting.com] On Behalf Of Dick Dievendorff
> Sent: Saturday, January 05, 2008 7:14 PM
> To: WriteLog@contesting.com
> Subject: [WriteLog] FW: WriteLog, MMTTY plug-in,
> MK2R+,Carrier only on transmit
>
>
> Plain MMTTY, without Writelog, will send FSK. So it's
> something I have
> wrong between WriteLog, MMTTY Plug-in and MMTTY.
>
>
>
> From: Dick Dievendorff [mailto:dieven@comcast.net]
> Sent: Saturday, January 05, 2008 3:46 PM
> To: 'WriteLog@contesting.com'
> Subject: WriteLog, MMTTY plug-in, MK2R+, Carrier only on transmit
>
>
>
> I'm trying (for the first time) to get Writelog, MMTTY, the
> MMTTY plug-in
> and an MK2R+ running for a few QSOs before the ARRL RU ends.
>
>
>
> I can receive RTTY fine.
>
>
>
> I'm sending carrier only.
>
>
>
> When I have Writelog shut down, the microHAM router Ports
> tab, FSK says
> "COM 6" and the PTT checkbox is checked. When I click Test
> and listen on
> another receiver, I can hear FSK. I believe therefore that my MK2R is
> keying the rig (PTT) and shifting frequency (FSK).
>
>
>
> The radio is an IC-7800 in RTTY mode.
>
>
>
> When I fire up WriteLog 10.42D and configure the ports, I
> have selected COM6
> in the RTTYrite window and have checked Software generated FSK DTR.
>
>
>
> Under RTTYrite TU type (MMTTY) MMTTY settings, Misc tab, the
> Tx port shows
> COM -Txd (FSK) selected, but it's greyed out. AA5LU's very
> nice tutorial
> tells me that this is an indication that a port has not been
> selected. But
> I think I have selected the Port in the Rttyrite window, it's COM6.
>
>
>
> Obviously I'm missing a step. Can anyone suggest a way to get TX FSK
> working?
>
>
>
> TU & 73 de Dick, K6KR
>
>
>
>
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web: http://www.writelog.com/
>
>
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|