Thanks to Ed, N1EK:
>> Here is one thing to check: when you push the Mode button on the
>> FTdx10, is the Presets button gray or blue. On mine, it must be blue.
Ah, it is gray.
Changed to BLUE.
Don't know how it got changed.
Everything is fine now.
N1MM + WSJT must set all the parameters.
.......
. Robert F. Teitel, W3IDT
.
. w3idt@comcast.net
. w3idt@arrl.net
........
On 6/16/2025 4:05 PM, Bob, W3IDT via VHFcontesting wrote:
VHF list.
(Will also post something similar to LOGGER32, N1MM, and PVRC lists)
Yaesu FTdx10 radio
All,
Hope someone can help.
1. Logger32 + JTDX used to work fine, now does not.
(preferred FT8 general operating environment).
2. As did Logger32 + WSJT, now does not.
3. As did WSJT stand-alone, now does not.
4. As did JTDX stand-alone, now does not.
5. N1MM + WSJT did not decode,
now works fine with a quirk
(preferred for FT8 contesting environment).
So, once [1 - 4] once worked fine; [5] did not decode.
Now [1 - 4] decode fine; but do not transmit; [5] works fine with quirk.
[WSJT and JTDX for the above tests are in five separate folders.]
[1 - 4] Basic settings are fine, and are same for all
but [TUNE] does not work:
Decodes are fine.
[CAT] works - green.
[PTT] turns on XMT.
[AUDIO]
Input: Line (USB AUDIO CODEC)
Output: Speakers(USB AUDIO CODEC)
[TUNE] generates a tone ONLY
if the radio MONITOR is set to about 80%,
and the tone does not sound pure
nor does it look pure on the band-scope.
[5] N1MM + WSJT: Sets radio mode to DATA-L, should be DATA-U.
even WSJT stand-alone sets mode to DATA_U.
Radio off; Cold restart of PC; Radio On cycle does not help.
Enough information?
Bob, w3idt
_______________________________________________
VHFcontesting mailing list
VHFcontesting@contesting.com
http://lists.contesting.com/mailman/listinfo/vhfcontesting
|