TNX all for your helpful suggestions. If the foot kit is still available from
Yaesu USA in CA, I'll get it. TNX to W9KXI for the research, it's the same feet
for the FT450. If they are not available, I'll get something 3-D printed or
perhaps use some ready-made rubber feet that can also screw right in as the
screws and base of the one that broke are still with me. TNX es 73, Rick K1DS
________________________________
From: Rick R <rick1ds@hotmail.com>
Sent: Tuesday, May 6, 2025 12:17 PM
To: vhf contesting <vhfcontesting@contesting.com>; NEWS Reflector
<newsvhf@mailman.qth.net>; packrats reflector <packrats@mailman.qth.net>
Subject: FT100D plastic foot replacement
My Yaesu FT100D has a broken and missing hinged plastic foot that props up the
front. Any source to get a replacement or another fix? The other foot is OK.
Perhaps someone has an idea as both feet have a screw into the bottom of the
rig. I use the rig in so many portable activities and would like to preserve
that. Thanks
Rick K1DS
_______________________________________________
VHFcontesting mailing list
VHFcontesting@contesting.com
http://lists.contesting.com/mailman/listinfo/vhfcontesting
|