I have a couple of the power amps made from
the Motorola boards designed by Granberg.
These require 24-28 volts, and have not been
in use for a long time. I'd check them out if
somebody is interested.
The first is a bipolar unit, 100 watts, 432, linear
known as KEB-67 from Communications
Concepts based in Xenia Oh. I used it on SAT
stuff and got about 80 Watts out with 10 or so
in. Well behaved, uses the MRF 309. Is mounted
on heat sink and probably ready to go.
The second is a FET unit, rated to do 300 watts
10-175 megs. Has antenna relays, etc, but no
low pass filter. I do not use it much so can't speak
to its behavior. Had similar amps in FM BC transmitters
as drivers and those behaved well.
Both were kits from CCI assembled here.
So...if these are of use contact me off list and
we will see if we can get them off my inventory.
de K8RYU
_______________________________________________
VHFcontesting mailing list
VHFcontesting@contesting.com
http://lists.contesting.com/mailman/listinfo/vhfcontesting
|