Finally, after 30+ years of being a ham, I get to dip my toe into the VHF
contest beyond 6m.
I have an old, and somewhat flaky, IC-275H coupled with a 14-element yagi
to get on the contest this weekend (from EM48to). The flaky bit of the old
rig is that frequency control is *not* available from the VCO knob (I'm
guessing the phototransistors are cooked), and neither N1MM+ nor DXLog can
get the radio to recognized frequency input with the computer keypad.
The UP/DWN buttons on the mic work though, ;)
So, I'm programming some frequencies into the memories of this rig. I've
got
- 144.175 CW
- 144.200 SSB
Any other common watering holes I should program in?
This is my first foray into 2m CW/SSB, so I'm a complete newbie here.
Thanks for any tips/tricks you can supply.
73, Jim KK0U
_______________________________________________
VHFcontesting mailing list
VHFcontesting@contesting.com
http://lists.contesting.com/mailman/listinfo/vhfcontesting
|