>I seem to remember a thread or two about touching up rusted or tarnished
>Galvanized tower with some type of paint? Any suggestions?
>
>thanks,
>
>ed
>
>w1zz
>
Hello Ed:
I bought 7 sections of used Rohn 25 about 15 years ago and used steel wool
to remove rust and brush-on zinc coating to touch up the nasty spots. I
wrapped the end of a 10 stick of 1/2" thinwall conduit with coarse steel
wool and used it to clean the INSIDE of each leg, then used a rag on the
conduit to make a giant Q-TIP for painting the inside of each leg. Three
coats inside and out, with at least 24 hour drying time between coats. I
pulled the tower down after 10+ years (lost the qth in a divorce) and it
came right apart and looked as good inside and out as the day I put it up.
Steve Weber, KD9BO
seweber@netnitco.net
When promulgating your esoteric cogitations or articulating your
superficial sentimentalities and amicable philosophical and psychological
observations, beware of platitudinous ponderosity. Let your verbal
evaporations have lucidity, intelligibility, and veracious vivacity without
rodomontade or thespian bombast. Sedulously avoid all polysyllabic
profundity, pompous propensity, and sophomoric vacuity.
In other words, KISS (keep it simple etc.)
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|