There are different sized prop pitch motors so no they are all not the
same. I have different sized ones. The rotator plate also needs a very
large clearance hole in the middle. I drilled the bolt holes using the
gear half as a template. If you already have the motor it is easy to
measure and if you ordered a rotator from K7NV it would be highly unusual
for him not to respond.
John KK9A
To: <towertalk@contesting.com>
Subject: [TowerTalk] prop pitch
From: "Rick" <n4hu@mindspring.com>
Date: Thu, 15 Mar 2018 06:03:19 -0400
I have ordered a new crankup tower and would like the rotor mounting plate to
be drilled at the factory for the hole pattern of a prop pitch rotor.
I don’t know if all or most prop pitch rotors have the same hole pattern or
not. I have emailed K7NV but have not received a reply yet. The factory
is pushing me for an answer. Can anyone offer some guidance?
Thanks
Rick
N4HU
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|