Towertalk
[Top] [All Lists]

Re: [TowerTalk] K4KIO hex beam file for modeling

To: k7lxc@aol.com, towertalk@contesting.com
Subject: Re: [TowerTalk] K4KIO hex beam file for modeling
From: Mike Fatchett W0MU <w0mu@w0mu.com>
Date: Sat, 5 Jul 2025 08:12:36 -0600
List-post: <mailto:towertalk@contesting.com>
I was looking for the modeling file for NEC or other antenna modeling programs.  A number of people put me on the right track. I would like to model interaction with other antennas close by.

Thanks.

W0MU

On 7/4/2025 5:56 PM, k7lxc@aol.com wrote:
> Does anyone have such an animal?
  What would be the specific info you're looking for? It's a pretty simple a pretty narrow set of specs. I'm not an engineer or expert but I've installed 3 of them and this is what I learned.   Each owner assembled the Hexbeam on their picnic table adjacent to their home. After assembly, each owner WORKED DX as they tested it OTA on the picnic table. Imo this is a pretty decent design with good performance.
  GL with whatever your project is.
Cheers,
Steve     K7LXC
TOWER TECH
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
<Prev in Thread] Current Thread [Next in Thread>