Rusty,
You can use the T2X in the LM-470, if that is the model you have. You'll
need to use spacers to raise the plate up about 1 1/2" inches, to allow the
rotor to clear the cross braces. Karl Tashjian can supply them or you can make
your own out of a piece of angle iron. The tower will telescope all the way
down with the rotor install.
If you need I can supply you a picture of the plate with the spacers.
Skip, KJ6Y
_Communications Service Co_ (http://members.aol.com/kj6y/skip.html)
818-887-3569
************************************** Get a sneak peek of the all-new AOL at
http://discover.aol.com/memed/aolcom30tour
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|