On 11/26/2025 6:59 PM, Jorge Diez - CX6VM wrote:
thanks John
.........
For me is much better to bring this parts from United States with a
forwarder, just that don't know if this sizes are available in US
Not commonly as they're metric. In fact, however, although the
instructions list the boom - to - mast clamp saddle as "2 inch", it
turns out that is actually a British "2 inch" and is really only about
1.945" diameter as measured with a standard, regular,
international-measure (read: Chinese) micrometer. As a result, their "2
inch" clamp saddle would NOT fit properly over my actual American 2 inch
diameter mast, which measured 1.9985" diameter. I would have had to file
or grind the stock clamp saddles to fit my American 2-inch-diameter
mast. Instead, and since this was only a temporary installation for now,
I had to leave off the U-bolt saddles.
You can try e-mailing DXE for help; they just might be able to, or
expedite the delivery of replacement parts to you; they just might have
an "in" with WiMo directly. Due to our tariffs and all the complications
those entail, however, it might be better to work directly with WiMo in
Germany.
Steve, K0XP
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|