Date: Wed, 21 Feb 2018 21:57:49 -0500
From: N4ZR <n4zr@comcast.net>
To: TowerTalk <TowerTalk@contesting.com>
Subject: [TowerTalk] Good Fastener Practice
<I am in the process of reassembling an old F12 C3E, and noticed that
<there were no washers with it.? Somewhere I think I recall reading that
<when you use split lock washers, for example with U-bolts for attaching
<elements to flat aluminum brackets, you should also use flat washers
<between the split lock and the bracket.? True or false?
<73, Pete N4ZR
## always use SS flatwashers along with the SS split ring lcokwashers...
otherwise the split ring lockwashers will chew up the flat al plates. The oem
F12 U bolts are semi useless in most cases. Mine all severely rusted. Replaced
everything with new SS DXE U bolts, solid al saddlesm SS flatwashers, SS
split ring lockwashers. Used never seize goop on the SS threads, end of
problems.
SS nylocks also works, then no need for SS split ring lockwashers, nut you
still require
SS flatwashers.
Jim VE7RF
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|