I have never drilled through the mast & bolted. Have had to climb the
towers a couple of times in the last 20 years to readjust when we had high
winds, and the mast slipped a little in the clamps. I would rather have to
do this once in awhile than have something break in the rotator.
73,
Tim - N3XX
----- Original Message -----
From: "mrlogs" <mrlogs@verizon.net>
To: <towertalk@contesting.com>
Sent: Wednesday, March 11, 2009 8:19 PM
Subject: [TowerTalk] Pinning my mast in rotator clamp
> Hi All..
> My Yaesu G-1000DXA manual say's to drill thru the mast & put a bolt thru
> the rotator & mast to keep it (the mast) from turning in the clamp. I was
> told to do a survey here & get everyone's input on doing this as it might
> be a bad idea..
> Thanks for your input!
> 73'..Tom N3ZC
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|