I am using the earliest of the design (same as current) for my OM 2300,
however with a turned aluminum adapter that is 2.5" outside diameter
interfaced into a 3" mast. I have dealt with thunderstorms & one tornado
with winds 80mph+ with no slippage at all. I would attempt to increase the
diameter of your clamped diameter with an adapter of some sort. Q: what
diameter and material are attempting to clamp to? My EPA (Extended Profile
Area) is 13 SqFt. (2 ea M2 yagis) With the tower rated at 25SqFt.
-Doug WB1E
On Mon, Sep 23, 2024 at 9:49 PM <kq2m@kq2m.com> wrote:
>
> Hi Tony,
>
> I have not used a K7NV mast clamp so I can't speak to it's performance.
> But I have been using an Orion 2800 on my top 20 - 5L LJ105CA on a 35'
> boom at 130' for the past 15 years. In all that time with two
> hurricanes, 1 tornado, and dozens of 80+ mph wind gusts, ice storms,
> Nor'easters, etc. the mast has loosened up only twice.
>
> My antenna is clamped against both the mast as well as the boom and
> balanced for weight at the point at which it is mounted on the boom. I
> believe that the special truss and torque clamp apparatus that I made
> and currently use may have something to do with the clamps longevity as
> it has significantly reduced the rocking of the antenna during periods
> of extremely high winds.
>
> I have not found it necessary to purchase a K7NV clamp but those who
> have used one speak very highly of it. The main issue is that the mast
> is circular and the stock Orion clamp is more in the shape of a "V"
> which ensures that there is far less than the maximum possible surface
> area of the clamp coming into contact with and gripping the mast.
> Weather, topography, wind and other factors come into play so that no
> two qth's will experience the same set of challenging conditions on the
> clamp. My qth is particularly windy and turbulent and prone to
> exceptionally violent storms at times so it takes a toll sooner rather
> than later on anything up on my towers. I'm happy with the performance
> of the stock Orion clamp but all you need is one incident of
> catastrophic clamp failure to ruin your day. ;-)
>
> 73 and GL!
>
> Bob, KQ2M
>
>
> On 2024-09-23 14:44, Anthony DeBiasi wrote:
> > I am presently using an older M2 Orion rotator. After 22+ years it has
> > failed and needs replacing. When I moved to Florida 3 years ago,
> > instead of using the supplied stock mast clamps I purchased a K7NV mast
> > clamp which some of you may be using. The K7NV mast clamp definitely
> > prevents slippage although in 18 years at my last QTH which was fairly
> > windy the stock mast clamps only slipped once during a hurricane which
> > was easy to correct with the Green Heron RT-21 controller and snugging
> > up the clamp bolts. I should mention the rotator is on a 86’ Tashjian
> > tower that nests to 23’ and is fairly easy to access.
> >
> > I am trying to decide if it would be better to replace the K7NV mast
> > clamp with the stock M2 mast clamps that are more likely to slip. Why
> > would I considering the change, to possibly put less stress on the M2
> > rotator. On the tower from the bottom up there is a JK-Mid Tri/40, a
> > 5el M2 6m yagi and on top is a WARC JK1217. Although I live in
> > Florida, I am located about 15 miles inland and 35 miles north of
> > Tampa. We do get a lot of Thunderstorms in the summer but the wind has
> > been far less than I experienced in Northern NJ and Southern NJ.
> >
> > Would appreciate the advice of anyone who has experience with either
> > the stock M2 clamps or the N7NV clamp. I know you can put a pin through
> > the clamps and mast but I wouldn’t suggest that.
> >
> > 73, Tony K2SG
> > _______________________________________________
> >
> >
> >
> > _______________________________________________
> > TowerTalk mailing list
> > TowerTalk@contesting.com
> > http://lists.contesting.com/mailman/listinfo/towertalk
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|