Will these do the trick?
https://www.homedepot.com/p/Husky-Thin-Head-Access-Wrench-Set-6-Piece-H100THCW6PCSM/305713153
On Tue, Jul 21, 2020 at 6:36 PM K9MA <k9ma@sdellington.us> wrote:
> "Thin head wrenches" does yield some results, but none of them seem to
> specify the actual thickness. That includes the very expensive set from
> McMaster-Carr. I have many sets of "Ignition Wrenches", but all except
> that old, cheap one are thicker than a 6-32 or 8-32 nut. Perhaps the
> solution is a cheap set from Harbor Freight, and the grinder.
>
> 73,
> Scott K9MA
>
> On 7/21/2020 6:00 PM, jimlux wrote:
> > On 7/21/20 3:26 PM, Don wrote:
> >> And metric.
> >>
> >> Don W7WLL
> >>
> >>
> >> On 7/21/2020 2:03 PM, K9MA wrote:
> >>
> >> Speaking of which, it's hard to find wrenches thin enough to lock two
> >> 6-32 or 8-32 nuts together. I have one old, cheap, Craftsman set that
> >> works, but sooner or later I'm going to lose one of those up on the
> >> tower. All the small wrench sets ("Ignition Wrenches") available seem
> >> to be too thick. Short of grinding them down, does anyone know where
> >> to get thin ones in SAE sizes?
> >>
> >
> >
> > google for "thin head wrench"
> > Lowes and Home Depot have them.
> >
> > The 6 and 7mm are 2.2 mm thick (1/4 and 5/16 in SAE), the 8-11mm are
> > 2.6mm - those are a tenth of an inch thick, roughly.
> >
> >
> > or "ignition wrench" - same sort of thing - about 1/16" thick for the
> > small ones.
> >
> >
> > I used to buy 5/16" (fits SMA) double open end wrenches in lots of 10,
> > because we'd lose them. You'd put one in your pocket, and forget
> > about it, or it would be on your desk, then get buried.
> >
> >
> > _______________________________________________
> >
> >
> >
> > _______________________________________________
> > TowerTalk mailing list
> > TowerTalk@contesting.com
> > http://lists.contesting.com/mailman/listinfo/towertalk
>
>
> --
> Scott K9MA
>
> k9ma@sdellington.us
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
--
- 73 -
- Joe W6JWP
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|