Towertalk
[Top] [All Lists]

Re: [TowerTalk] pull lubricant -- follow-up (installing Heliax connector

Subject: Re: [TowerTalk] pull lubricant -- follow-up (installing Heliax connector
From: Lew Sayre <lew@dsl-only.net>
Date: Thu, 28 Jul 2011 21:17:26 -0700
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Yo,
    I recently bought the MCPT 78 from Kollman Radio, along with a slug of
other stuff. The price was around $33. They also listed the prep tool for
the 1/2" hardline also which was around $24.
They shipped out the gear rapidly and everything I ordered was in stock.
I have no interest in Kollman Radio other than being a very happy user who
had what I needed.
    73 and I remain,
    Lew    W7EW

On Thu, Jul 28, 2011 at 12:34 PM, Richard Solomon <dickw1ksz@gmail.com>wrote:

> I want one also, but the minimum buy put me off. Since you and I make
> two, all we
> need is a third and we are golden.
> Anyone else want one ? I would be happy to act as conduit.
>
> 73, Dick, W1KSZ
>
> On Thu, Jul 28, 2011 at 12:14 PM, Dick Green WC1M <wc1m73@gmail.com>
> wrote:
> > The online order system didn't reject my order. Of course, that doesn't
> mean
> > it won't get rejected when they go to process it. Did you register as an
> > individual?
> >
> > -----Original Message-----
> > From: Richard Solomon [mailto:dickw1ksz@gmail.com]
> > Sent: Wednesday, July 27, 2011 4:39 PM
> > To: TOWERTALK@contesting.com
> > Subject: Re: [TowerTalk] pull lubricant -- follow-up (installing Heliax
> > connector
> >
> > I tried to order one from Tessco, but they have a $50 minimum order.
> >
> > 73, Dick, W1KSZ
> >
> > On Wed, Jul 27, 2011 at 12:49 PM, Dick Green WC1M <wc1m73@gmail.com>
> wrote:
> >> Thanks. I went back and read the registration categories more carefully.
> >> They include "individual". So I setup and account and ordered an LDF4-50
> >> prep tool. It was about $19, quite a bit cheaper than TheRFC. They don't
> >> have a prep tool for LDF5-50, but in the past I've found that it's not
> all
> >> that hard to manually prep.
> >>
> >> 73, Dick WC1M
> >>
> >> -----Original Message-----
> >> From: john@kk9a.com [mailto:john@kk9a.com]
> >> Sent: Tuesday, July 26, 2011 10:35 PM
> >> To: TOWERTALK@contesting.com
> >> Subject: Re: [TowerTalk] pull lubricant -- follow-up (installing Heliax
> >> connector
> >>
> >> It is pretty easy to set up an account at Tessco
> >>
> >>
> >> To: towertalk <towertalk@contesting.com>
> >> Subject: Re: [TowerTalk] pull lubricant -- follow-up (installing Heliax
> >> connectors)
> >> From: Steve Maki <lists@oakcom.org>
> >> Date: Tue, 26 Jul 2011 16:31:50 -0400
> >> List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
> >>
> >> Yes, I see what you mean. The Andrew Easiax MCPT-L4 is easily available
> >> from Tessco, Hutton, Pace, etc, but not many consumer oriented dealers
> >> advertize it. RF Parts has it for 34.50.
> >>
> >> I've heard that Tessco will sell to anyone, but if not, drop me a direct
> >> email with your details and I'll have them drop ship you one.
> >>
> >> -Steve K8LX
> >>
> >> On 7/26/2011 3:57 PM, Dick Green WC1M wrote:
> >>
> >>>> If you ever anticipate installing L4 (1/2") connectors again, do
> >>>> yourself a favor and buy an Andrew Easiax tool. It's just a clamp type
> >>>> manual prep tool with internal razor blades that cuts the shield right
> >>>> on top of a peak and cuts the jacket at the same time. We install
> >>>> thousands of these connectors (usually over 100 on one cell site as we
> >>>> build it) and once you get rolling it takes 4 or 5 minutes per
> connector
> >>>> max.
> >>
> >>> Thanks. I knew about the tool, but for two reasons I didn't buy one:
> >>>
> >>> First, it wasn't clear to me that there were two blades that cut both
> the
> >>> jacket and the shield. Some of the descriptions implied only one blade,
> >>> which would just cut the jacket.
> >>>
> >>> But more important, when I looked on the Internet to find one, they
> were
> >>> only available from distributors who sell only to businesses (or, at
> > least
> >>> it looks that way.) Can anyone direct me to a place where I can buy one
> > of
> >>> these tools for a reasonable price?
> >>
> >>
> >>
> >> _______________________________________________
> >>
> >>
> >>
> >> _______________________________________________
> >> TowerTalk mailing list
> >> TowerTalk@contesting.com
> >> http://lists.contesting.com/mailman/listinfo/towertalk
> >>
> >
> >
> >
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>