Hi All
I have a Yaesu 800 SA rotor that is not responding
We had some bad thunderstorms/lightning and that may have caused the motor
to be fried as i am reading 400ohms between pins 4 and 5 of the rotor (the
motor pins)
It used to read under 10 ohms before. This is when limit switches are not
on.
When either limit switches are on, pins 4 and 5 reads open (as expected)
I am wondering if this motor can be replaced or is the rotor a paperweight
now?
If this motor can be replaced, where may i find one?
thanks
jim s basu
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|