Jim, thanks for the comment.
Yes, the new rotor motors ship with the seven pin male connector on the
motor. The older motor has a larger six pin plug.
I am looking for a source of both. If none are known, then I will call
Yaesu.
Terry - W6LMJ
On 1/26/10 1:58 AM, "towertalk-request@contesting.com"
<towertalk-request@contesting.com> wrote:
> On Tue, 26 Jan 2010 00:14:05 -0500, Terrence R. Redding Ph.D. wrote:
>
>> I am wondering if there is a source for the six pin and seven
>> pin female connectors that attach at the rotor motor end of the
>> rotor control cable?
>
> I'm looking at schematic in the Yaesu manual for the rotor I bought
> new this summer. The part numbr for the connector attached to the
> rotor is NJC-207-RW. The cable-mounted connector that mates with it
> is NJC-207-PF. At the time, I looked at the connectors and decided
> that they were Japanese parts, but I did not recognize a mfr.
>
> The same manual also includes schematics for the G-2800DXA. The
> corresponding connectors for that rotor are designated NJW-207-RW
> and NJW-207-PF. I've not seen a G-2800DXA, so don't know the
> difference between the connectors.
>
> The connectors for both rotors are 7-pin connectors.
>
> 73,
>
> Jim K9YC
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|