Towertalk
[Top] [All Lists]

Re: [TowerTalk] Sealing Coax Connector

To: "TowerTalk" <towertalk@contesting.com>
Subject: Re: [TowerTalk] Sealing Coax Connector
From: Richard Solomon <w1ksz@q.com>
Date: Thu, 14 Oct 2010 10:31:52 -0700
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
I found a roll of Coax Seal that I had forgotten I had.
All is well now.

Thanks to all that replied.

73, Dick, W1KSZ

-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com]On Behalf Of Gene Fuller
Sent: Thursday, October 14, 2010 10:21 AM
To: Mark Robinson; Richard Solomon; TowerTalk
Subject: Re: [TowerTalk] Sealing Coax Connector


I have used two methods each of which have lasted at least ten years for
me -
 - wrap thoroughly with 3M self sealing tape
 - stuff connector with silicon grease leaving no room for
condensation/water, wrap thoroughly with good quality electrical tape and
then smear genreously with RTV, overlapping each successive layer well onto
the coax jacket.
To be super safe could use silcon grease, self sealing tape and RTV
They each would be a PIA to dissassemble but could be slit with a sharp
blade and peeled off.
Gene / W2LU

----- Original Message -----
From: "Mark Robinson" <markrob@mindspring.com>
To: "Richard Solomon" <w1ksz@q.com>; "TowerTalk" <towertalk@contesting.com>
Sent: Thursday, October 14, 2010 12:45 PM
Subject: Re: [TowerTalk] Sealing Coax Connector


> Man that is a can of worms...lol.............just joking
>
> People seem to have so many different methods...I use coax-seal...a goop
> specially made for the purpose. Messy but effective  I have been
> recommended
> to use 3M 103C by a coax-seal hater..hi hi
>
>
> I will be very interested to see all the other methods that people use.
>
>
> Mark N1UK
>
>
>
>
> ----- Original Message -----
> From: "Richard Solomon" <w1ksz@q.com>
> To: "TowerTalk" <towertalk@contesting.com>
> Sent: Thursday, 14 October, 2010 12:40 PM
> Subject: [TowerTalk] Sealing Coax Connector
>
>
>>I have a few SO-239 connectors that will be exposed to the weather. I want
>> to
>> seal them from the elements.
>> Can anyone suggest some "goop" that will do that without messing up the
>> RF
>> characteristics ? Something that will work up into the VHF Bands.
>>
>> 73, Dick, W1KSZ
>>
>> _______________________________________________
>>
>>
>>
>> _______________________________________________
>> TowerTalk mailing list
>> TowerTalk@contesting.com
>> http://lists.contesting.com/mailman/listinfo/towertalk
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>